Freesco, NND, CDN, EOS • Wyświetl temat - Kto mi wytlumaczy te logi?

Posty bez odpowiedzi | Aktywne tematy

Indeks witryny » NND » Instalacja i konfiguracja (NND)

Strefa czasowa UTC+2godz.

Kto mi wytlumaczy te logi?

Moderatorzy: tasiorek, JakubC, Mis'

Strona 1 z 1

[ Posty: 5 ]

Podgląd wydruku

Poprzedni temat | Następny temat

Autor

Wiadomość

wanter

Tytuł: Kto mi wytlumaczy te logi?

: środa, 30 maja 2007, 20:36

Rejestracja: niedziela, 25 lutego 2007, 17:30
Posty: 77

Czasem jest tak, że net niby działa (serwer odpowiada na pingi) a na komputerach podłączonych do serwera nie ma neta. Ani nie da się wejść na stronę www serwera, ani podłączyć się przez ssh. Najgorsze jest to, że w tym momencie mój skrypt na restartowanie połączenia staje się bezużyteczny, bo niby serwer ma neta:( A eth0 i eth1 też nie padają bo da się pingować serwer z sieci lokalnej. Nie wiem o co chodzi? Serwer staje się takim warzywem i tylko twardy reset pomaga, no ale do tego trzeba być w domu. Miał ktoś już tak?

/var/log/errors:

Cytuj:

May 29 23:41:54 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 29 23:41:54 router pppoa[3539]: recv (ReceivePacket): Network is down
May 29 23:41:54 router pppoa[3539]: sendto (SendPPPPacket size: 44): No such device or address
May 29 23:43:50 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 09:23:01 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 09:23:01 router pppoa[3049]: recv (ReceivePacket): Network is down
May 30 09:23:01 router pppoa[3049]: sendto (SendPPPPacket size: 44): No such device or address
May 30 14:30:44 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 14:31:53 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 14:33:33 router kernel: ACPI: Unable to locate RSDP
May 30 14:33:41 router kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
May 30 14:33:41 router last message repeated 2 times
May 30 14:35:37 router pppoa[369]: read (AsyncReadFromPPP): Input/output error
May 30 17:46:25 router kernel: ACPI: Unable to locate RSDP
May 30 17:46:33 router kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
May 30 17:46:33 router last message repeated 2 times
May 30 19:26:03 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 19:26:03 router pppoa[371]: recv (ReceivePacket): Network is down
May 30 19:26:03 router pppoa[371]: sendto (SendPPPPacket size: 44): No such device or address
May 30 19:27:06 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 19:27:55 router pppoa[15371]: read (AsyncReadFromPPP): Input/output error
May 30 19:54:58 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 19:54:58 router pppoa[15449]: recv (ReceivePacket): Network is down
May 30 19:54:58 router pppoa[15449]: sendto (SendPPPPacket size: 1496): No such device or address
May 30 19:57:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 19:58:08 router kernel: [EAGLE-USB] CRC count threshold reached. Rebooting
May 30 20:13:58 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 20:13:58 router pppoa[20963]: recv (ReceivePacket): Network is down
May 30 20:13:58 router pppoa[20963]: sendto (SendPPPPacket size: 48): No such device or address
May 30 20:15:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 20:16:10 router pppoa[24542]: read (AsyncReadFromPPP): Input/output error

Na górę

Maciek

Tytuł:

: środa, 30 maja 2007, 21:15

Honorowy Admin

Rejestracja: piątek, 5 lipca 2002, 17:30
Posty: 7800
Lokalizacja: Słupsk

Przypuszczam, że dałoby się zalogować na serwer z sieci lokalnej. Logi wskazują na problemy z modemem (sagem). Trudno mi wyrokować o przyczynach, ale na początek zmieniłbym kabel łączący sagema z komputerem na grubszy, bo może być to kwestia problemu z zasilaniem modemu - to coś całkiem sporo prądu pobiera. Jeśli kabel jest ok (ten dostarczony razem z modemem), to sprawdziłbym ogólnie zasilanie. Poza tym byc moze coś w logu kernel jest?

_________________
Obrazek

Belfer.one.PL

Audio Cafe

Na górę

wanter

Tytuł:

: czwartek, 31 maja 2007, 06:50

Rejestracja: niedziela, 25 lutego 2007, 17:30
Posty: 77

Dzisiaj poszukam jakiegoś lepszego kabla. Możliwe, że będzie się dało wejść z sieci lan ale nie ma kto na niego wejść. Zobaczę, może da coś puszczenie sygnału telefonicznego przez jakiś stabilizator czy cos w UPSie, jest tam cos takiego ale wydaje mi się, że to tylko pic na wodę.

Ten log mnie zastanawia. Od niego zaczyna sie padanie netu, a po którymś razie serwer warzywo.

Cytuj:

router kernel: [Eagle-usb] transmit error with URB status -110

/var/log/kernel:

Cytuj:

May 30 17:46:34 router kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 30 17:46:34 router kernel: VFS: Mounted root (ext3 filesystem) readonly.
May 30 17:46:34 router kernel: Freeing unused kernel memory: 224k freed
May 30 17:46:34 router kernel: Adding Swap: 65524k swap-space (priority -1)
May 30 17:46:34 router kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
May 30 17:46:35 router kernel: 8139too Fast Ethernet driver 0.9.26
May 30 17:46:35 router kernel: PCI: Found IRQ 10 for device 00:08.0
May 30 17:46:35 router kernel: eth0: RealTek RTL8139 at 0xc8821000, 00:30:84:78:67:48, IRQ 10
May 30 17:46:35 router kernel: eth0: Identified 8139 chip type 'RTL-8139C'
May 30 17:46:35 router kernel: PCI: Found IRQ 12 for device 00:09.0
May 30 17:46:35 router kernel: eth1: RealTek RTL8139 at 0xc8823000, 00:0e:2e:8b:2d:11, IRQ 12
May 30 17:46:35 router kernel: eth1: Identified 8139 chip type 'RTL-8100B/8139D'
May 30 17:46:35 router kernel: ip_tables: (C) 2000-2002 Netfilter core team
May 30 17:46:35 router kernel: ip_conntrack version 2.1 (1024 buckets, 8192 max) - 308 bytes per conntrack
May 30 17:46:35 router kernel: usb.c: registered new driver usbdevfs
May 30 17:46:35 router kernel: usb.c: registered new driver hub
May 30 17:46:35 router kernel: [eagle-usb] driver V2.3.2 loaded
May 30 17:46:36 router kernel: usb.c: registered new driver eagle-usb
May 30 17:46:36 router kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
May 30 17:46:36 router kernel: uhci.c: USB UHCI at I/O 0xe400, IRQ 11
May 30 17:46:36 router kernel: usb.c: new USB bus registered, assigned bus number 1
May 30 17:46:36 router kernel: hub.c: USB hub found
May 30 17:46:36 router kernel: hub.c: 2 ports detected
May 30 17:46:36 router kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
May 30 17:46:36 router kernel: hub.c: new USB device 00:07.2-1, assigned address 2
May 30 17:46:36 router kernel: [eagle-usb] New pre-firmware modem detected
May 30 17:46:36 router kernel: [eagle-usb] Uploading firmware..
May 30 17:46:36 router kernel: [eagle-usb] Binding eu_instance_t to USB 001/002
May 30 17:46:36 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 2
May 30 17:46:36 router kernel: [eagle-usb] Pre-firmware modem removed
May 30 17:46:36 router kernel: hub.c: new USB device 00:07.2-1, assigned address 3
May 30 17:46:36 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 17:46:36 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-003
May 30 17:46:36 router kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
May 30 17:46:36 router kernel: eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
May 30 17:46:36 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 17:46:37 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 17:46:37 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 17:46:37 router kernel: [eagle-usb] Loading DSP code to device...
May 30 17:46:37 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 17:47:09 router kernel: [eagle-usb] Modem operational !!
May 30 17:47:09 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 17:47:11 router kernel: CSLIP: code copyright 1989 Regents of the University of California
May 30 17:47:11 router kernel: PPP generic driver version 2.4.2
May 30 17:47:23 router kernel: HTB init, kernel part version 3.17
May 30 17:47:23 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 17:47:23 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 17:47:23 router kernel: HTB init, kernel part version 3.17
May 30 17:47:23 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 17:47:23 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 17:47:23 router kernel: HTB init, kernel part version 3.17
May 30 17:47:55 router kernel: blk: queue c05d2128, I/O limit 4095Mb (mask 0xffffffff)
May 30 19:26:03 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 19:26:03 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 19:26:03 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 3
May 30 19:26:03 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 30 19:26:03 router kernel: [eagle-usb] ADSL device removed
May 30 19:26:04 router kernel: hub.c: new USB device 00:07.2-1, assigned address 4
May 30 19:26:04 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 19:26:04 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-004
May 30 19:27:06 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 19:27:21 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 19:27:21 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 19:27:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 19:27:21 router kernel: [eagle-usb] Loading DSP code to device...
May 30 19:27:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 19:27:43 router kernel: [eagle-usb] Modem operational !!
May 30 19:27:43 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 19:28:06 router kernel: HTB init, kernel part version 3.17
May 30 19:28:06 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 19:28:06 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 19:28:06 router kernel: HTB init, kernel part version 3.17
May 30 19:28:06 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 19:28:06 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 19:28:06 router kernel: HTB init, kernel part version 3.17
May 30 19:54:58 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 19:54:58 router last message repeated 2 times
May 30 19:54:58 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 19:54:58 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 4
May 30 19:54:58 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 30 19:54:58 router kernel: [eagle-usb] ADSL device removed
May 30 19:54:59 router kernel: hub.c: new USB device 00:07.2-1, assigned address 5
May 30 19:54:59 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 19:54:59 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-005
May 30 19:57:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 19:57:21 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 19:57:21 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 19:57:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 19:57:21 router kernel: [eagle-usb] Loading DSP code to device...
May 30 19:57:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 19:57:38 router kernel: [eagle-usb] Modem operational !!
May 30 19:57:38 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 19:57:59 router kernel: HTB init, kernel part version 3.17
May 30 19:57:59 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 19:57:59 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 19:57:59 router kernel: HTB init, kernel part version 3.17
May 30 19:57:59 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 19:58:00 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 19:58:00 router kernel: HTB init, kernel part version 3.17
May 30 19:58:08 router kernel: [EAGLE-USB] CRC count threshold reached. Rebooting
May 30 19:58:30 router kernel: [eagle-usb] Modem operational !!
May 30 20:13:58 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 20:13:58 router last message repeated 8 times
May 30 20:13:58 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 20:13:58 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 5
May 30 20:13:58 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 30 20:13:58 router kernel: [eagle-usb] ADSL device removed
May 30 20:13:59 router kernel: hub.c: new USB device 00:07.2-1, assigned address 6
May 30 20:13:59 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 20:13:59 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-006
May 30 20:15:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 20:15:20 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 20:15:20 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 20:15:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 20:15:21 router kernel: [eagle-usb] Loading DSP code to device...
May 30 20:15:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 20:15:52 router kernel: [eagle-usb] Modem operational !!
May 30 20:15:52 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 20:16:21 router kernel: HTB init, kernel part version 3.17
May 30 20:16:21 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 20:16:21 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 20:16:22 router kernel: HTB init, kernel part version 3.17
May 30 20:16:22 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 20:16:22 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 20:16:22 router kernel: HTB init, kernel part version 3.17
May 30 21:09:42 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 21:09:43 router last message repeated 11 times
May 30 21:09:43 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 21:09:43 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 6
May 30 21:09:43 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 30 21:09:43 router kernel: [eagle-usb] ADSL device removed
May 30 21:09:43 router kernel: hub.c: new USB device 00:07.2-1, assigned address 7
May 30 21:09:43 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 21:09:43 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-007
May 30 21:12:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 21:12:21 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 21:12:21 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 21:12:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 21:12:21 router kernel: [eagle-usb] Loading DSP code to device...
May 30 21:12:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 21:13:10 router kernel: [eagle-usb] Modem operational !!
May 30 21:13:10 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 21:13:42 router kernel: HTB init, kernel part version 3.17
May 30 21:13:42 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 21:13:42 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 21:13:42 router kernel: HTB init, kernel part version 3.17
May 30 21:13:42 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 21:13:42 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 21:13:42 router kernel: HTB init, kernel part version 3.17
May 30 22:07:28 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 22:07:28 router last message repeated 2 times
May 30 22:07:28 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 22:07:28 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 7
May 30 22:07:28 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 22:07:28 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 30 22:07:28 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 22:07:28 router kernel: [Eagle-usb] transmit URB c6d7d520 cancelled
May 30 22:07:28 router kernel: [eagle-usb] ADSL device removed
May 30 22:07:28 router kernel: hub.c: new USB device 00:07.2-1, assigned address 8
May 30 22:07:28 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 22:07:28 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-008
May 30 22:09:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 22:09:20 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 22:09:20 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 22:09:20 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 22:09:20 router kernel: [eagle-usb] Loading DSP code to device...
May 30 22:09:20 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 22:09:54 router kernel: [eagle-usb] Modem operational !!
May 30 22:09:54 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 22:10:20 router kernel: HTB init, kernel part version 3.17
May 30 22:10:20 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 22:10:20 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 22:10:20 router kernel: HTB init, kernel part version 3.17
May 30 22:10:20 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 22:10:20 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 22:10:20 router kernel: HTB init, kernel part version 3.17
May 30 22:41:22 router kernel: [Eagle-usb] transmit error with URB status -110
May 30 22:41:22 router last message repeated 4 times
May 30 22:41:22 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 30 22:41:22 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 8
May 30 22:41:22 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 30 22:41:22 router kernel: [eagle-usb] ADSL device removed
May 30 22:41:23 router kernel: hub.c: new USB device 00:07.2-1, assigned address 9
May 30 22:41:23 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 30 22:41:23 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-009
May 30 22:42:08 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 30 22:42:24 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 30 22:42:24 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 30 22:42:24 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 30 22:42:24 router kernel: [eagle-usb] Loading DSP code to device...
May 30 22:42:24 router kernel: [eagle-usb] DSP code successfully loaded to device
May 30 22:42:41 router kernel: [eagle-usb] Modem operational !!
May 30 22:42:41 router kernel: [eagle-usb] Ethernet device eth2 created.
May 30 22:43:10 router kernel: HTB init, kernel part version 3.17
May 30 22:43:10 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 22:43:10 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 22:43:10 router kernel: HTB init, kernel part version 3.17
May 30 22:43:10 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 30 22:43:10 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 30 22:43:10 router kernel: HTB init, kernel part version 3.17
May 31 00:37:42 router kernel: [Eagle-usb] transmit error with URB status -110
May 31 00:37:42 router last message repeated 2 times
May 31 00:37:42 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 31 00:37:42 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 9
May 31 00:37:42 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 31 00:37:42 router kernel: [eagle-usb] ADSL device removed
May 31 00:37:43 router kernel: hub.c: new USB device 00:07.2-1, assigned address 10
May 31 00:37:43 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 31 00:37:43 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-010
May 31 00:39:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 31 00:39:21 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 31 00:39:21 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 31 00:39:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 31 00:39:21 router kernel: [eagle-usb] Loading DSP code to device...
May 31 00:39:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 31 00:39:44 router kernel: [eagle-usb] Modem operational !!
May 31 00:39:44 router kernel: [eagle-usb] Ethernet device eth2 created.
May 31 00:40:09 router kernel: HTB init, kernel part version 3.17
May 31 00:40:09 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 00:40:09 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 00:40:09 router kernel: HTB init, kernel part version 3.17
May 31 00:40:09 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 00:40:09 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 00:40:09 router kernel: HTB init, kernel part version 3.17
May 31 04:40:32 router kernel: [Eagle-usb] transmit error with URB status -110
May 31 04:40:32 router last message repeated 4 times
May 31 04:40:33 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 31 04:40:33 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 10
May 31 04:40:33 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 31 04:40:33 router kernel: [eagle-usb] ADSL device removed
May 31 04:40:33 router kernel: hub.c: new USB device 00:07.2-1, assigned address 11
May 31 04:40:33 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 31 04:40:33 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-011
May 31 04:42:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 31 04:42:21 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 31 04:42:21 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 31 04:42:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 31 04:42:21 router kernel: [eagle-usb] Loading DSP code to device...
May 31 04:42:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 31 04:42:38 router kernel: [eagle-usb] Modem operational !!
May 31 04:42:38 router kernel: [eagle-usb] Ethernet device eth2 created.
May 31 04:43:02 router kernel: HTB init, kernel part version 3.17
May 31 04:43:02 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 04:43:02 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 04:43:02 router kernel: HTB init, kernel part version 3.17
May 31 04:43:02 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 04:43:02 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 04:43:02 router kernel: HTB init, kernel part version 3.17
May 31 05:27:59 router kernel: [Eagle-usb] transmit error with URB status -110
May 31 05:27:59 router last message repeated 3 times
May 31 05:28:00 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 31 05:28:00 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 11
May 31 05:28:00 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 31 05:28:00 router kernel: [eagle-usb] ADSL device removed
May 31 05:28:00 router kernel: hub.c: new USB device 00:07.2-1, assigned address 12
May 31 05:28:00 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 31 05:28:00 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-012
May 31 05:30:06 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 31 05:30:21 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 31 05:30:21 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 31 05:30:21 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 31 05:30:21 router kernel: [eagle-usb] Loading DSP code to device...
May 31 05:30:21 router kernel: [eagle-usb] DSP code successfully loaded to device
May 31 05:30:38 router kernel: [eagle-usb] Modem operational !!
May 31 05:30:38 router kernel: [eagle-usb] Ethernet device eth2 created.
May 31 05:31:00 router kernel: HTB init, kernel part version 3.17
May 31 05:31:00 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 05:31:00 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 05:31:00 router kernel: HTB init, kernel part version 3.17
May 31 05:31:00 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 05:31:00 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 05:31:00 router kernel: HTB init, kernel part version 3.17
May 31 06:30:36 router kernel: [Eagle-usb] transmit error with URB status -110
May 31 06:30:36 router last message repeated 10 times
May 31 06:30:36 router kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
May 31 06:30:36 router kernel: usb.c: USB disconnect on device 00:07.2-1 address 12
May 31 06:30:36 router kernel: [eagle-usb] eu_irq : URB canceled by user.
May 31 06:30:36 router kernel: [eagle-usb] ADSL device removed
May 31 06:30:37 router kernel: hub.c: new USB device 00:07.2-1, assigned address 13
May 31 06:30:37 router kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 31 06:30:37 router kernel: [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-013
May 31 06:33:05 router kernel: [EAGLE-USB] EU_IO_GETIF: eth not yet created !!
May 31 06:33:20 router kernel: [eagle-usb] ioctl EU_IO_CMVS received and treated.
May 31 06:33:20 router kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
May 31 06:33:20 router kernel: [eagle-usb] ioctl EU_IO_DSP received
May 31 06:33:20 router kernel: [eagle-usb] Loading DSP code to device...
May 31 06:33:20 router kernel: [eagle-usb] DSP code successfully loaded to device
May 31 06:33:59 router kernel: [eagle-usb] Modem operational !!
May 31 06:33:59 router kernel: [eagle-usb] Ethernet device eth2 created.
May 31 06:34:21 router kernel: HTB init, kernel part version 3.17
May 31 06:34:21 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 06:34:21 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 06:34:21 router kernel: HTB init, kernel part version 3.17
May 31 06:34:21 router kernel: HTB: quantum of class 10001 is big. Consider r2q change.
May 31 06:34:21 router kernel: HTB: quantum of class 10010 is big. Consider r2q change.
May 31 06:34:21 router kernel: HTB init, kernel part version 3.17

Na górę

czerwo

Tytuł:

: czwartek, 31 maja 2007, 09:58

MODERATOR

Rejestracja: wtorek, 31 sierpnia 2004, 23:06
Posty: 3267
Lokalizacja: Katowice

linia/modem.

_________________
Obrazek

Na górę

wanter

Tytuł:

: czwartek, 31 maja 2007, 13:44

Rejestracja: niedziela, 25 lutego 2007, 17:30
Posty: 77

Zmieniłem kabel usb oraz linie podpiąłem przez stabilizator no i po problemie. Nie wiem które pomogło ale nie chce mi sie kombinowac

Na górę

Strona 1 z 1

[ Posty: 5 ]

Indeks witryny » NND » Instalacja i konfiguracja (NND)

Strefa czasowa UTC+2godz.

Kto jest online

Użytkownicy przeglądający to forum: Bing [Bot] i 20 gości

Nie możesz tworzyć nowych tematów
Nie możesz odpowiadać w tematach
Nie możesz zmieniać swoich postów
Nie możesz usuwać swoich postów
Nie możesz dodawać załączników