Freesco, NND, CDN, EOS

Mam bardzo duze problemy z drukarka w SAMBIE a mianowicie:
W windowsach przy drukarce mam odmowa dostepu to jest pryszcz ale jak zaczynam drukowac to generuje ruch przez siec na poziomie 10MB/s i tak leci przez dluzszy czas windowsy w tym momencie jakby zamieraja i juz po 2 minutach mam wydrukowany tekst z notatnika (2 linie). Jeszcze co zauwazylem to w serwerze mam 3xlan + 1xneo na usb jezeli w konfigu samby usune z lini interfaces usune wszystkie kalsy adresowe i zostawie tylko jedna np. 192.168.0.1/24 to na windowsach znika przy drukarce napis odmowa dostepu.

Config SAMBY:
[global]
unix charset = UTF8
display charset = UTF8
unix charset = UTF8
workgroup = DOMKI
netbios name = SERWER
server string =
security = SHARE
log file = /usr/local/samba/var/log.%m
max log size = 50
max ttl = 1000
max wins ttl = 1000
min wins ttl = 1000
time server = Yes
os level = 99
preferred master = Yes
domain master = Yes
dns proxy = No
load printers = No
#printcap name = /etc/printcap
#wins server = 127.0.0.1
wins support = Yes
ldap ssl = no
# host msdfs = Yes
hosts allow = 127. 10.10.10. 192.168.0. 192.168.1.
interfaces = 10.10.10.1/255.255.255.0 \ 192.168.0.1/255.255.255.0 \ 192.168.1.1/255.255.255.0
keep alive = 10

[hp1115]
comment = "Drukarki"
path = /usr/spool/samba
writable = no
public = yes
printable = yes
print command = cp %s /dev/lp0;rm %s
guest ok = yes
read only = no
create mode = 0777

w logach mam:
sh: line 1: lpq: command not found
sh: line 1: lpq: command not found
sh: line 1: lpq: command not found
[2005/04/11 19:05:31, 1] smbd/service.c:make_connection_snum(705)
192.168.0.3 (192.168.0.3) connect to service hp1115 initially as user nobody (
sh: line 1: lpq: command not found
[2005/04/11 19:05:42, 1] smbd/service.c:close_cnum(887)
192.168.0.3 (192.168.0.3) closed connection to service hp1115
sh: line 1: lpq: command not found
sh: line 1: lpq: command not found
sh: line 1: lpq: command not found
sh: line 1: lpq: command not found
sh: line 1: lpq: command not found


Jeszcze jedno jezeli drukuje spod Mandrake 10.1 to nie ma najmniejszego problemu naciskam drukuj i odrazu drukarka sie bierze do roboty. Spotkał sie ktos kiedys z takim problemem??

_________________