Freesco, NND, CDN, EOS

Mamy na serwie Freesco 0.2.7 i ostatnio trace kontakt z routerkiem .. tzn nie dochodza pingi i nie ma neta. W logach widnieja mi rozne dziwne wpisy

Aug 19 10:06:09 - kernel: ip_masq_icq: using TCP port range 60200-61000
Aug 19 10:06:09 - kernel: ip_masq_icq: loaded support on port 4000/UDP
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - last message repeated 7 times
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.A0 failed
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.B0 failed
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.A0 failed
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.B0 failed
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - last message repeated 7 times
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.A1 failed
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.B1 failed
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.A1 failed
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.B1 failed
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - last message repeated 7 times
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.A2 failed
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.B2 failed
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - insmod: Symbol 'io' not found
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.A2 failed
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.B2 failed
Aug 19 10:06:09 - insmod: Cannot open /mnt/router/drv/*.o
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/3c509.o.C failed
Aug 19 10:06:09 - kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/3c59x.o.C failed
Aug 19 10:06:09 - kernel: ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/ne2k-pci.o.C failed
Aug 19 10:06:09 - kernel: rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
Aug 19 10:06:09 - kernel: eth0: RealTek RTL8139 Fast Ethernet at 0x6100, IRQ 10, 00:30:4f:2d:e0:b0.
Aug 19 10:06:09 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Aug 19 10:06:09 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/smc-ultra.o.C failed
Aug 19 10:06:09 - insmod: Initialization of /tmp/net/tulip.o.C failed
Aug 19 10:06:09 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Aug 19 10:06:09 - insmod: Initialization of /tmp/prm/ne.o.C failed
Aug 19 10:06:11 - mode: User 'init' issued 'mode sdi'
Aug 19 10:06:12 - named[173]: starting. named 4.9.3-BETA26 Sun Nov 26 20:58:49 CST 1995 ^Iroot@fuzzy:/tmp/bind-4.9.3-BETA26/named
Aug 19 10:06:12 - named[173]: cache zone "" loaded (serial 0)
Aug 19 10:06:12 - named[173]: primary zone "CHROBREGO" loaded (serial 1999317)
Aug 19 10:06:12 - named[173]: primary zone "10.in-addr.arpa" loaded (serial 1999317)
Aug 19 10:06:12 - named[173]: primary zone "16.172.in-addr.arpa" loaded (serial 1999317)
Aug 19 10:06:12 - named[173]: primary zone "168.192.in-addr.arpa" loaded (serial 1999317)
Aug 19 10:06:12 - named[173]: primary zone "0.0.127.in-addr.arpa" loaded (serial 1999317)
Aug 19 10:06:12 - named[174]: Ready to answer queries.
Aug 19 10:06:15 localhost thttpd[293]: thttpd/2.05 09nov99 starting on port 82
Aug 19 10:06:15 localhost thttpd[293]: started as root without requesting chroot(), warning only
Aug 19 10:06:15 localhost thttpd[297]: thttpd/2.05 09nov99 starting on port 80
Aug 19 10:06:15 localhost thttpd[297]: started as root without requesting chroot(), warning only
Aug 19 10:06:15 - control: User '' issued 'control force'
Aug 19 10:06:15 - diald[284]: FIFO: Force request received.
Aug 19 10:06:16 - diald[284]: Running connect (pid = 334).
Aug 19 10:06:16 - connect: Chat finished successfully
Aug 19 10:06:16 - diald[284]: Running pppd (pid = 337).
Aug 19 10:06:16 - diald[337]: Running pppd: /bin/pppd -detach modem crtscts mtu 552 mru 552
Aug 19 10:06:16 - kernel: registered device ppp0
Aug 19 10:06:16 - pppd[337]: pppd 2.3.5 started by root, uid 0
Aug 19 10:06:16 - pppd[337]: Using interface ppp0
Aug 19 10:06:16 - pppd[337]: Connect: ppp0 <--> /dev/cua0
Aug 19 10:06:19 - pppd[337]: Remote message:
Aug 19 10:06:19 - pppd[337]: local IP address 80.49.243.157
Aug 19 10:06:19 - pppd[337]: remote IP address 80.49.243.157
Aug 19 10:06:20 - named[174]: No root nameservers for class IN
Aug 19 09:06:22 - ntpdate[430]: step time server 193.67.79.202 offset -3598.662994 sec

Moze mi ktos to wyjaśnic??
P.S freessco stoji juz od 3 miechów wczesniej było OK teraz cos sie wali... w sieci mamy 5 kompów!!!

Te logi nic tu nie wnoszą. Jakiemasz oprogramowanie? Co ostatnio zainstalowałeś?

_________________
Belfer.one.PL
Audio Cafe

Mam standardowe freesco 0.2.7 pod SDI ... nie instalowałem zadnych dodatkowych pakietów... a co jakis czas serwer sie wiecha tak ze pingi nie dochoadza trzeba recznie twardo resetowac, wczesniej tego nie było. System stoji na PI MMX 166 mhz 32 Mb ramu

Czyli... wnioskuję, że jest to standardowe Freesco na dyskietce bez dodatków, czyli nie ma justice, nie ma rshappera...
Gołe Freesco nie ma prawa się wieszać. Z logów w każdym razie nie wynika żadna przyczyna. Pytanie czy to Freesco sie zawiesza, czy raczej dostęp do netu. Może jakiś XP sieje coś na porcie 135 lub 445. Moze ktoś agresywnie włączył p2p i zapycha tabelę maskarady... zbyt wiele niewiadomych... próbujmy dalej...

_________________
Belfer.one.PL
Audio Cafe

Tak jest to gołe freesco 0.2.7

Moje sie wiesza raz na 2 dni czasem czesciej.

A co oznaczaja te




Zawiesza sie freesco bo jakby tylko połaczenie sie wiechało to mógłbym sie zalogowac do niego i chodziłyby pingi, wczesniej wiechało mi sie połaczenie pomagał reset DNSów


Mało prawdopodobne.... jest nas 5 w sieci i 4 osoby ograniczas sie jedynie do czatów GG i odbierania maili

J

edynym osobnikiem który uzywa p2p jestem ja sam ....ale mam ustawwiony na NETLIMITERZE max download na 5 kb a max upload na 1kb.... Jesli to moze byc przyczyna zwiech to bede zawiedziony bo u mnie p2p chodza 24 na dobe i zalezy mi zeby serwer był stabilny!! Co proponujesz??? Zmiana kernela odpada jestem poczatkującym .. chyba ze nowsze freesco ??
P.S dodam jescze ze mam zmniejszone czasy maskarady... na te polecane przez was na Forum.