Freesco, NND, CDN, EOS :: Wyświetl temat

: [/] [] ()

[root@serwer mrtg]# mrtg /etc/mrtg/mrtg.conf
WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.1':
   Expected a Number for 'out' but got 'serwer'

WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.2':
   Expected a Number for 'out' but got 'serwer'

WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.3':
   Expected a Number for 'out' but got 'serwer'

WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.4':
   Expected a Number for 'out' but got 'serwer'

WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.5':
   Expected a Number for 'out' but got 'serwer'

Rateup WARNING: /usr/bin/rateup could not read the primary log file for eth0
Rateup WARNING: /usr/bin/rateup The backup log file for eth0 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove eth0.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename eth0.log to eth0.old updating log file
Rateup WARNING: /usr/bin/rateup could not read the primary log file for ppp0
Rateup WARNING: /usr/bin/rateup The backup log file for ppp0 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove ppp0.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename ppp0.log to ppp0.old updating log file
ERROR: Target[10.0.0.1][_OUT_] ' $target->[2]{$mode} ' did not eval into defined data
Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.1
Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.1 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.1.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.1.log to 10.0.0.1.old updating log file
ERROR: Target[10.0.0.2][_OUT_] ' $target->[3]{$mode} ' did not eval into defined data
Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.2
Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.2 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.2.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.2.log to 10.0.0.2.old updating log file
ERROR: Target[10.0.0.3][_OUT_] ' $target->[4]{$mode} ' did not eval into defined data
Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.3
Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.3 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.3.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.3.log to 10.0.0.3.old updating log file
ERROR: Target[10.0.0.4][_OUT_] ' $target->[5]{$mode} ' did not eval into defined data
Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.4
Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.4 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.4.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.4.log to 10.0.0.4.old updating log file
ERROR: Target[10.0.0.5][_OUT_] ' $target->[6]{$mode} ' did not eval into defined data
Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.5
Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.5 was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.5.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.5.log to 10.0.0.5.old updating log file
Rateup WARNING: /usr/bin/rateup could not read the primary log file for hosty
Rateup WARNING: /usr/bin/rateup The backup log file for hosty was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove hosty.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename hosty.log to hosty.old updating log file
Rateup WARNING: /usr/bin/rateup could not read the primary log file for cpu
Rateup WARNING: /usr/bin/rateup The backup log file for cpu was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove cpu.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename cpu.log to cpu.old updating log file
Rateup WARNING: /usr/bin/rateup could not read the primary log file for swap
Rateup WARNING: /usr/bin/rateup The backup log file for swap was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove swap.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename swap.log to swap.old updating log file
Rateup WARNING: /usr/bin/rateup could not read the primary log file for mem
Rateup WARNING: /usr/bin/rateup The backup log file for mem was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove mem.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename mem.log to mem.old updating log file
Rateup WARNING: /usr/bin/rateup could not read the primary log file for procesy
Rateup WARNING: /usr/bin/rateup The backup log file for procesy was invalid as well
Rateup WARNING: /usr/bin/rateup Can't remove procesy.old updating log file
Rateup WARNING: /usr/bin/rateup Can't rename procesy.log to procesy.old updating log file

Autor:	Mody [ sobota, 7 stycznia 2006, 19:01 ]
Tytuł:	Konfiguracja MRTG
Zainastalowałem MRTG poleceniem: pacman -S mrtg Jak teraz zkonfigurować mrtg dal interfejsów eth0, eth1, ppp0 i cpu ?? Pozdrawiam

Autor:	ccrash [ sobota, 7 stycznia 2006, 19:07 ]
Tytuł:
nndconf

Autor:	Mody [ sobota, 7 stycznia 2006, 19:23 ]
Tytuł:
Dzięki Pozdrawiam

Autor:	ccrash [ sobota, 7 stycznia 2006, 20:03 ]
Tytuł:
do uslug

Autor:	Anonymous [ niedziela, 8 stycznia 2006, 12:03 ]
Tytuł:
Ja podobnie, zainstalowałem, odpaliłem nndconf, przed wyjściem z ekranu konfiguracji sypnął jakimś błędem chyba [nie zauważyłem bo za szybko zniknęło]. Odpalam mrtg /etc/mrtg/mrtg.conf i utonąłem w errorach : [/] [] () [root@serwer mrtg]# mrtg /etc/mrtg/mrtg.conf WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.1': Expected a Number for 'out' but got 'serwer' WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.2': Expected a Number for 'out' but got 'serwer' WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.3': Expected a Number for 'out' but got 'serwer' WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.4': Expected a Number for 'out' but got 'serwer' WARNING: Problem with Externale get '/etc/mrtg/mrtg.ip 10.0.0.5': Expected a Number for 'out' but got 'serwer' Rateup WARNING: /usr/bin/rateup could not read the primary log file for eth0 Rateup WARNING: /usr/bin/rateup The backup log file for eth0 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove eth0.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename eth0.log to eth0.old updating log file Rateup WARNING: /usr/bin/rateup could not read the primary log file for ppp0 Rateup WARNING: /usr/bin/rateup The backup log file for ppp0 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove ppp0.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename ppp0.log to ppp0.old updating log file ERROR: Target[10.0.0.1][_OUT_] ' $target->[2]{$mode} ' did not eval into defined data Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.1 Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.1 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.1.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.1.log to 10.0.0.1.old updating log file ERROR: Target[10.0.0.2][_OUT_] ' $target->[3]{$mode} ' did not eval into defined data Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.2 Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.2 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.2.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.2.log to 10.0.0.2.old updating log file ERROR: Target[10.0.0.3][_OUT_] ' $target->[4]{$mode} ' did not eval into defined data Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.3 Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.3 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.3.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.3.log to 10.0.0.3.old updating log file ERROR: Target[10.0.0.4][_OUT_] ' $target->[5]{$mode} ' did not eval into defined data Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.4 Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.4 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.4.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.4.log to 10.0.0.4.old updating log file ERROR: Target[10.0.0.5][_OUT_] ' $target->[6]{$mode} ' did not eval into defined data Rateup WARNING: /usr/bin/rateup could not read the primary log file for 10.0.0.5 Rateup WARNING: /usr/bin/rateup The backup log file for 10.0.0.5 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove 10.0.0.5.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename 10.0.0.5.log to 10.0.0.5.old updating log file Rateup WARNING: /usr/bin/rateup could not read the primary log file for hosty Rateup WARNING: /usr/bin/rateup The backup log file for hosty was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove hosty.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename hosty.log to hosty.old updating log file Rateup WARNING: /usr/bin/rateup could not read the primary log file for cpu Rateup WARNING: /usr/bin/rateup The backup log file for cpu was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove cpu.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename cpu.log to cpu.old updating log file Rateup WARNING: /usr/bin/rateup could not read the primary log file for swap Rateup WARNING: /usr/bin/rateup The backup log file for swap was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove swap.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename swap.log to swap.old updating log file Rateup WARNING: /usr/bin/rateup could not read the primary log file for mem Rateup WARNING: /usr/bin/rateup The backup log file for mem was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove mem.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename mem.log to mem.old updating log file Rateup WARNING: /usr/bin/rateup could not read the primary log file for procesy Rateup WARNING: /usr/bin/rateup The backup log file for procesy was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove procesy.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename procesy.log to procesy.old updating log file GeSHi © Codebox Plus Co jest grane? :/

Freesco, NND, CDN, EOS http://forum.freesco.pl/

Konfiguracja MRTG http://forum.freesco.pl/viewtopic.php?f=22&t=10607	Strona 1 z 1

Autor:	MAC!EK [ niedziela, 8 stycznia 2006, 12:17 ]
Tytuł:
sprawdź wynik : : [/] [] () /etc/mrtg/mrtg.ip 10.0.0.1 GeSHi © Codebox Plus I dlaczego jest nie taki jak trzeba

Autor:	puchatek007 [ niedziela, 8 stycznia 2006, 14:15 ]
Tytuł:
Może to ci pomoże: http://banita.pl/books/pdf/mrtg-referat.pdf A ja mam takie małe pytanko, kiedyś miałem do tego polecenie a teraz mi je gdzieś wcieło i niewiem jak to zrobić. Chodzi o wygenerowanie pliku html urzywając filtra. W konfigu mam tak że wykresy dotyczące serwera mają w [serwer.**] a dotyczące userów [users.***]. I teraz chce wygenerować html-a który ma tylko wykresy dotyczące serwera.

Strona 1 z 1	Strefa czasowa UTC+2godz.
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Autor:	Anonymous [ niedziela, 8 stycznia 2006, 13:11 ]
Tytuł:
Nie wiem jaki trzeba, ale ja mam taki: : [/] [] () [root@serwer mrtg]# /etc/mrtg/mrtg.ip 10.0.0.2 11357524 1185760 4 days, 1:04 serwer GeSHi © Codebox Plus Sprawdziłem dla 10.0.0.2 bo dla 10.0.0.1 to przeważnie są same zera Znalazłem na forum żeby odpalić jakiś "/etc/rc.d/mrtg start" i wygląda na to że od tego czasu wszystko działa Tylko czemu nikt mi tego wcześniej nie powiedział To powinno być w jakimś FAQ albo na stronie NND w sekcji "Konfiguracja" [w której pisze tylko że NND nie wymaga konfiguracji a to nieprawda ;P]. Hmm... z tego co tu widzę, to format danych wyjściowych ze skryptów dla MRTG jest w postaci czterech linijek, dwie pierwsze to jakieś dane, a później uptime i nazwa hosta [patrząc do środka skryptu tak by to wyglądało]. Skoro tak, to chętnie zrobiłbym sobie skrypty do wyświetlania transferów poszczególnych klas HTB dla userów. Chyba że wystarczą te regułki z IPTables Mam tylko jeden problem: jak zmusić MRTG by aktualizował wykresy częściej niż co 5 minut? Najbardziej interesowałyby mnie wykresy zmieniające się tak co kilka...kilkanaście sekund, bo tylko wtedy pomiar aktualnego transferu dla userów jest w miarę rzetelny. Bardziej mi zależy na statystykach typu "ile kto ściąga aktualnie i w przeciągu ostatnich paru minut" a nie "ile kto ściągał dziennie/miesięcznie" [choć to się przyda pewnie]. Roczne transfery najchętniej bym wywalił całkowicie BTW czy te rysunki są aktualizowane przy każdym odświeżeniu wszystkie? czy np. roczne dopiero co rok? Przydałby się link do jakiejś dobrej dokumentacji MRTG, jak ustawić targety, wykresy, kolorki, jednostki, HTML, jakieś tutoriale, przykłady... Gdyby ktoś podał taki link, zaoszczędziłoby mi to parę godzin przesiewania tego, co wypluwają Google