Freesco, NND, CDN, EOS :: Wyświetl temat

Nov 15 09:40:20 k3 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 15 09:40:20 k3 kernel: Inspecting /boot/System.map
Nov 15 09:40:21 k3 kernel: Loaded 28564 symbols from /boot/System.map.
Nov 15 09:40:21 k3 kernel: Symbols match kernel version 2.4.32.
Nov 15 09:40:21 k3 kernel: Loaded 88 symbols from 10 modules.
Nov 15 09:40:21 k3 kernel: Linux version 2.4.32-10nnd (root@nnd-builder) (gcc version 3.3.3) #1 SMP pią lip 28 17:56:31 BST 2
Nov 15 09:40:21 k3 kernel: BIOS-provided physical RAM map:
Nov 15 09:40:21 k3 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 15 09:40:21 k3 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 15 09:40:21 k3 kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Nov 15 09:40:21 k3 kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Nov 15 09:40:21 k3 kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Nov 15 09:40:21 k3 kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 15 09:40:21 k3 kernel: 0MB HIGHMEM available.
Nov 15 09:40:21 k3 kernel: 255MB LOWMEM available.
Nov 15 09:40:21 k3 kernel: On node 0 totalpages: 65520
Nov 15 09:40:21 k3 kernel: zone(0): 4096 pages.
Nov 15 09:40:21 k3 kernel: zone(1): 61424 pages.
Nov 15 09:40:21 k3 kernel: zone(2): 0 pages.
Nov 15 09:40:21 k3 kernel: DMI not present.
Nov 15 09:40:21 k3 kernel: ACPI: RSDP (v000 VIA694 ) @ 0x000f6ce0
Nov 15 09:40:21 k3 kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
Nov 15 09:40:22 k3 kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
Nov 15 09:40:22 k3 kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Nov 15 09:40:22 k3 kernel: Kernel command line: auto BOOT_IMAGE=NND_Router ro root=301 ide=nodma
Nov 15 09:40:22 k3 kernel: ide_setup: ide=nodma : Prevented DMA
Nov 15 09:40:22 k3 kernel: No local APIC present or hardware disabled
Nov 15 09:40:22 k3 kernel: Initializing CPU#0
Nov 15 09:40:22 k3 kernel: Detected 634.800 MHz processor.
Nov 15 09:40:22 k3 kernel: Console: colour VGA+ 80x25
Nov 15 09:40:22 k3 kernel: Calibrating delay loop... 1264.84 BogoMIPS
Nov 15 09:40:22 k3 kernel: Memory: 253284k/262080k available (3362k kernel code, 8412k reserved, 1256k data, 232k init, 0k hi
Nov 15 09:40:22 k3 kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 15 09:40:22 k3 kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Nov 15 09:40:22 k3 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 15 09:40:22 k3 kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Nov 15 09:40:22 k3 kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 15 09:40:22 k3 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Nov 15 09:40:22 k3 kernel: CPU: L2 cache: 128K
Nov 15 09:40:22 k3 kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
Nov 15 09:40:22 k3 kernel: CPU: Common caps: 0383f9ff 00000000 00000000 00000000
Nov 15 09:40:22 k3 kernel: Enabling fast FPU save and restore... done.
Nov 15 09:40:22 k3 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 15 09:40:22 k3 kernel: Checking 'hlt' instruction... OK.
Nov 15 09:40:22 k3 kernel: ACPI: IRQ9 SCI: Level Trigger.
Nov 15 09:40:23 k3 kernel: POSIX conformance testing by UNIFIX
Nov 15 09:40:23 k3 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 15 09:40:23 k3 kernel: mtrr: detected mtrr type: Intel
Nov 15 09:40:23 k3 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Nov 15 09:40:23 k3 kernel: CPU: L2 cache: 128K
Nov 15 09:40:23 k3 kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
Nov 15 09:40:23 k3 kernel: CPU: Common caps: 0383f9ff 00000000 00000000 00000000
Nov 15 09:40:23 k3 kernel: CPU0: Intel Celeron (Coppermine) stepping 03
Nov 15 09:40:23 k3 kernel: per-CPU timeslice cutoff: 365.63 usecs.
Nov 15 09:40:23 k3 kernel: SMP motherboard not detected.
Nov 15 09:40:23 k3 kernel: Local APIC not detected. Using dummy APIC emulation.
Nov 15 09:40:23 k3 kernel: Waiting on wait_init_idle (map = 0x0)
Nov 15 09:40:23 k3 kernel: All processors have done init_idle
Nov 15 09:40:23 k3 kernel: ACPI: Subsystem revision 20040326
Nov 15 09:40:23 k3 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1
Nov 15 09:40:23 k3 kernel: PCI: Using configuration type 1
Nov 15 09:40:23 k3 kernel: ACPI: Interpreter enabled
Nov 15 09:40:23 k3 kernel: ACPI: Using PIC for interrupt routing
Nov 15 09:40:23 k3 kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Nov 15 09:40:23 k3 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Nov 15 09:40:23 k3 kernel: PCI: Probing PCI hardware (bus 00)
Nov 15 09:40:23 k3 kernel: PCI: Via IRQ fixup
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Nov 15 09:40:23 k3 kernel: PCI: Probing PCI hardware
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Nov 15 09:40:23 k3 kernel: PCI: Using ACPI for IRQ routing
Nov 15 09:40:23 k3 kernel: PCI: Disabling Via external APIC routing
Nov 15 09:40:23 k3 kernel: Linux NET4.0 for Linux 2.4
Nov 15 09:40:23 k3 kernel: Based upon Swansea University Computer Society NET3.039
Nov 15 09:40:23 k3 kernel: Initializing RT netlink socket
Nov 15 09:40:23 k3 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Nov 15 09:40:23 k3 kernel: apm: overridden by ACPI.
Nov 15 09:40:23 k3 kernel: Starting kswapd
Nov 15 09:40:23 k3 kernel: VFS: Disk quotas vdquot_6.5.1
Nov 15 09:40:23 k3 kernel: Journalled Block Device driver loaded
Nov 15 09:40:23 k3 kernel: SGI XFS with no debug enabled
Nov 15 09:40:23 k3 kernel: SGI XFS Quota Management subsystem
Nov 15 09:40:23 k3 kernel: ACPI: Power Button (FF) [PWRF]
Nov 15 09:40:23 k3 kernel: ACPI: Sleep Button (CM) [SLPB]
Nov 15 09:40:23 k3 kernel: ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
Nov 15 09:40:23 k3 kernel: vga16fb: initializing
Nov 15 09:40:23 k3 kernel: vga16fb: mapped to 0xc00a0000
Nov 15 09:40:23 k3 kernel: Console: switching to colour frame buffer device 80x30
Nov 15 09:40:23 k3 kernel: fb0: VGA16 VGA frame buffer device
Nov 15 09:40:23 k3 kernel: Detected PS/2 Mouse Port.
Nov 15 09:40:23 k3 kernel: pty: 512 Unix98 ptys configured
Nov 15 09:40:23 k3 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Nov 15 09:40:23 k3 kernel: keyboard: Timeout - AT keyboard not present?(ed)
Nov 15 09:40:23 k3 kernel: keyboard: Timeout - AT keyboard not present?(f4)
Nov 15 09:40:23 k3 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 15 09:40:23 k3 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 15 09:40:23 k3 kernel: Real Time Clock Driver v1.10f
Nov 15 09:40:23 k3 kernel: FDC 0 is a post-1991 82077
Nov 15 09:40:23 k3 kernel: RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
Nov 15 09:40:23 k3 kernel: loop: loaded (max 8 devices)
Nov 15 09:40:23 k3 kernel: Compaq SMART2 Driver (v 2.4.28)
Nov 15 09:40:23 k3 kernel: HP CISS Driver (v 2.4.60)
Nov 15 09:40:23 k3 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 15 09:40:23 k3 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 15 09:40:23 k3 kernel: VP_IDE: IDE controller at PCI slot 00:07.1
Nov 15 09:40:23 k3 kernel: VP_IDE: chipset revision 16
Nov 15 09:40:23 k3 kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 15 09:40:23 k3 kernel: VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
Nov 15 09:40:23 k3 kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
Nov 15 09:40:23 k3 kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
Nov 15 09:40:23 k3 kernel: hda: ST38422A, ATA DISK drive
Nov 15 09:40:23 k3 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 15 09:40:23 k3 kernel: hda: attached ide-disk driver.
Nov 15 09:40:23 k3 kernel: hda: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=16708/16/63
Nov 15 09:40:23 k3 kernel: Partition check:
Nov 15 09:40:23 k3 kernel: hda: hda1 hda2
Nov 15 09:40:23 k3 kernel: SCSI subsystem driver Revision: 1.00
Nov 15 09:40:23 k3 kernel: sim710: No NCR53C710 adapter found.
Nov 15 09:40:23 k3 kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Nov 15 09:40:23 k3 kernel: Detecting Adaptec I2O RAID controllers...
Nov 15 09:40:23 k3 kernel: Red Hat/Adaptec aacraid driver (1.1-3 Jul 28 2006 18:00:41)
Nov 15 09:40:23 k3 kernel: scsi: <fdomain> Detection failed (no card)
Nov 15 09:40:23 k3 kernel: NCR53c406a: no available ports found
Nov 15 09:40:23 k3 kernel: sym53c416.c: Version 1.0.0-ac
Nov 15 09:40:23 k3 kernel: Failed initialization of WD-7000 SCSI card!
Nov 15 09:40:24 k3 kernel: DC390: 0 adapters found
Nov 15 09:40:24 k3 kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Nov 15 09:40:24 k3 kernel: aec671x_detect:
Nov 15 09:40:24 k3 kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Nov 15 09:40:24 k3 kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Nov 15 09:40:24 k3 kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Nov 15 09:40:24 k3 kernel: 3w-xxxx: No cards found.
Nov 15 09:40:24 k3 kernel: nsp32: loading...
Nov 15 09:40:24 k3 kernel: libata version 1.11 loaded.
Nov 15 09:40:24 k3 kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Nov 15 09:40:24 k3 last message repeated 2 times
Nov 15 09:40:24 k3 kernel: md: linear personality registered as nr 1
Nov 15 09:40:24 k3 kernel: md: raid0 personality registered as nr 2
Nov 15 09:40:24 k3 kernel: md: raid1 personality registered as nr 3
Nov 15 09:40:24 k3 kernel: md: raid5 personality registered as nr 4
Nov 15 09:40:24 k3 kernel: raid5: measuring checksumming speed
Nov 15 09:40:24 k3 kernel: 8regs : 1169.600 MB/sec
Nov 15 09:40:24 k3 kernel: 32regs : 568.800 MB/sec
Nov 15 09:40:24 k3 kernel: pIII_sse : 1279.200 MB/sec
Nov 15 09:40:24 k3 kernel: pII_mmx : 1432.800 MB/sec
Nov 15 09:40:24 k3 kernel: p5_mmx : 1498.800 MB/sec
Nov 15 09:40:24 k3 kernel: raid5: using function: pIII_sse (1279.200 MB/sec)
Nov 15 09:40:24 k3 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 15 09:40:24 k3 kernel: md: Autodetecting RAID arrays.
Nov 15 09:40:24 k3 kernel: md: autorun ...
Nov 15 09:40:24 k3 kernel: md: ... autorun DONE.
Nov 15 09:40:24 k3 kernel: LVM version 1.0.8(17/11/2003)
Nov 15 09:40:24 k3 kernel: Initializing Cryptographic API
Nov 15 09:40:24 k3 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 15 09:40:24 k3 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 15 09:40:24 k3 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Nov 15 09:40:24 k3 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Nov 15 09:40:24 k3 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 15 09:40:24 k3 kernel: kjournald starting. Commit interval 5 seconds
Nov 15 09:40:24 k3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 15 09:40:24 k3 kernel: VFS: Mounted root (ext3 filesystem) readonly.
Nov 15 09:40:24 k3 kernel: Freeing unused kernel memory: 232k freed
Nov 15 09:40:24 k3 kernel: Adding Swap: 32756k swap-space (priority -1)
Nov 15 09:40:24 k3 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Nov 15 09:40:24 k3 kernel: 8139too Fast Ethernet driver 0.9.26
Nov 15 09:40:24 k3 kernel: eth0: RealTek RTL8139 at 0xd0823000, 00:e0:4c:09:43:d6, IRQ 10
Nov 15 09:40:24 k3 kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Nov 15 09:40:24 k3 kernel: eth1: RealTek RTL8139 at 0xd0825000, 00:0b:2b:12:ff:59, IRQ 11
Nov 15 09:40:24 k3 kernel: eth1: Identified 8139 chip type 'RTL-8100B/8139D'
Nov 15 09:40:25 k3 kernel: ip_conntrack version 2.1 (2047 buckets, 16376 max) - 308 bytes per conntrack
Nov 15 09:40:25 k3 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 15 09:40:25 k3 kernel: eth1: link up, 10Mbps, half-duplex, lpa 0x0000
Nov 15 09:40:25 k3 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Nov 15 09:40:29 k3 kernel: imq driver loaded.
Nov 15 09:40:29 k3 kernel: ipt_time loading
Nov 15 09:40:30 k3 kernel: HTB init, kernel part version 3.17
Nov 15 09:40:31 k3 kernel: HTB init, kernel part version 3.17
Nov 15 09:40:37 k3 kernel: IPP2P v0.8.1_rc1 loading
Nov 15 09:40:40 k3 kernel: HTB init, kernel part version 3.17
Nov 15 09:40:42 k3 last message repeated 3 times
Nov 15 09:41:00 k3 kernel: eth1: Promiscuous mode enabled.
Nov 15 09:41:00 k3 kernel: device eth1 entered promiscuous mode

Autor:	-MW- [ wtorek, 14 listopada 2006, 20:35 ]
Tytuł:	i znowu dziwne logi
kernel Cytuj: Nov 14 18:39:16 k3 kernel: hda: lost interrupt Nov 14 18:39:16 k3 kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } Nov 14 18:39:16 k3 kernel: Nov 14 18:39:16 k3 kernel: hda: drive not ready for command Nov 14 19:16:03 k3 kernel: hda: lost interrupt Nov 14 19:16:03 k3 kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } Nov 14 19:16:03 k3 kernel: Nov 14 19:16:03 k3 kernel: hda: drive not ready for command dysk siada? errors Cytuj: Nov 14 18:39:16 k3 kernel: hda: lost interrupt Nov 14 18:39:16 k3 kernel: hda: drive not ready for command Nov 14 19:16:03 k3 kernel: hda: lost interrupt Nov 14 19:16:03 k3 kernel: hda: drive not ready for command

Autor:	Mis' [ wtorek, 14 listopada 2006, 21:00 ]
Tytuł:	Re: i znowu dziwne logi
-MW- pisze: Cytuj: Nov 14 18:39:16 k3 kernel: hda: lost interrupt Nov 14 18:39:16 k3 kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } Nov 14 18:39:16 k3 kernel: Nov 14 18:39:16 k3 kernel: hda: drive not ready for command oczywiście aktualny backup masz, prawda? To radze go mieć pod ręką - ten dysk jest na ostatnich nogach... no chyba że to taśma albo kontroler, ale wątpię...

Autor:	-MW- [ wtorek, 14 listopada 2006, 21:12 ]
Tytuł:
efekt jest taki ze caly komp zawiesza sie na godzine, nie ma do niego dojscia z zadnej strony, a po jakims czasie znowu wstaje i dziala kilka, kilkanascie godzin po czym znowu pada. zainstalowalem binda i mam pytanie czy takie wpisy w messages sa normalne czy znowu cos sie sypie? Cytuj: Nov 14 20:17:28 k3 named[484]: FORMERR resolving 'cache.mynapster.com.k3.net/A/IN': 216.52.184.230#53 Nov 14 20:17:34 k3 named[484]: FORMERR resolving 'stopcollect.bearshare.com.k3.net/A/IN': 63.251.92.193#53 Nov 14 20:17:34 k3 named[484]: FORMERR resolving 'stopcollect.bearshare.com.k3.net/A/IN': 70.42.37.1#53 Nov 14 20:17:34 k3 named[484]: FORMERR resolving 'stopcollect.bearshare.com.k3.net/A/IN': 216.52.184.230#53 Cytuj: Nov 14 20:17:46 k3 named[484]: FORMERR resolving 'www.mager.org.k3.net/A/IN': 216.52.184.230#53 Nov 14 20:18:09 k3 named[484]: FORMERR resolving 'collect.bearshare.com.k3.net/A/IN': 70.42.37.1#53 Nov 14 20:18:09 k3 named[484]: FORMERR resolving 'collect.bearshare.com.k3.net/A/IN': 63.251.92.193#53 Nov 14 20:18:09 k3 named[484]: FORMERR resolving 'collect.bearshare.com.k3.net/A/IN': 216.52.184.230#53 Nov 14 20:18:39 k3 named[484]: FORMERR resolving 'collect.bearshare.com.k3.net/A/IN': 63.251.92.193#53 Nov 14 20:18:39 k3 named[484]: FORMERR resolving 'collect.bearshare.com.k3.net/A/IN': 70.42.37.1#53

Autor:	tasiorek [ wtorek, 14 listopada 2006, 21:31 ]
Tytuł:
Logi binda sa ok, a z dyskiem zacznij sie powoli zegnac.

Autor:	-MW- [ wtorek, 14 listopada 2006, 21:35 ]
Tytuł:
dodam ze caly system instalowany byl na innej platformie, a dysk zabrany i podmieniony do innego kompa, czy to tez moze miec duzy wplyw? wszystko stalo tak dwa miesiace bez zadnej awari az nagle zaczely sie sypac dns-y postawione na dnsmasq. za namowa kolegi zmienilem na binda, ale nic to nie dalo. w/w wpisy w logach pojawily sie po raz pierwszy dzisiaj - moze na cos naprowadza. ale dziwi mnie fakt ze inny router ktory stoi bezawaryjnie przywieziony w to miejsce wysiadl po 5 minutach

Freesco, NND, CDN, EOS http://forum.freesco.pl/

i znowu dziwne logi http://forum.freesco.pl/viewtopic.php?f=22&t=14065	Strona 1 z 1

Autor:	-MW- [ środa, 15 listopada 2006, 14:22 ]
Tytuł:
po zmianie dysku. troche to dlugie ale moze ktos skomentuje czy tu sie mozna do czegos doczepic? Cytuj: Nov 15 09:40:20 k3 kernel: klogd 1.4.1, log source = /proc/kmsg started. Nov 15 09:40:20 k3 kernel: Inspecting /boot/System.map Nov 15 09:40:21 k3 kernel: Loaded 28564 symbols from /boot/System.map. Nov 15 09:40:21 k3 kernel: Symbols match kernel version 2.4.32. Nov 15 09:40:21 k3 kernel: Loaded 88 symbols from 10 modules. Nov 15 09:40:21 k3 kernel: Linux version 2.4.32-10nnd (root@nnd-builder) (gcc version 3.3.3) #1 SMP pią lip 28 17:56:31 BST 2 Nov 15 09:40:21 k3 kernel: BIOS-provided physical RAM map: Nov 15 09:40:21 k3 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Nov 15 09:40:21 k3 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Nov 15 09:40:21 k3 kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) Nov 15 09:40:21 k3 kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) Nov 15 09:40:21 k3 kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) Nov 15 09:40:21 k3 kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Nov 15 09:40:21 k3 kernel: 0MB HIGHMEM available. Nov 15 09:40:21 k3 kernel: 255MB LOWMEM available. Nov 15 09:40:21 k3 kernel: On node 0 totalpages: 65520 Nov 15 09:40:21 k3 kernel: zone(0): 4096 pages. Nov 15 09:40:21 k3 kernel: zone(1): 61424 pages. Nov 15 09:40:21 k3 kernel: zone(2): 0 pages. Nov 15 09:40:21 k3 kernel: DMI not present. Nov 15 09:40:21 k3 kernel: ACPI: RSDP (v000 VIA694 ) @ 0x000f6ce0 Nov 15 09:40:21 k3 kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 Nov 15 09:40:22 k3 kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 Nov 15 09:40:22 k3 kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Nov 15 09:40:22 k3 kernel: Kernel command line: auto BOOT_IMAGE=NND_Router ro root=301 ide=nodma Nov 15 09:40:22 k3 kernel: ide_setup: ide=nodma : Prevented DMA Nov 15 09:40:22 k3 kernel: No local APIC present or hardware disabled Nov 15 09:40:22 k3 kernel: Initializing CPU#0 Nov 15 09:40:22 k3 kernel: Detected 634.800 MHz processor. Nov 15 09:40:22 k3 kernel: Console: colour VGA+ 80x25 Nov 15 09:40:22 k3 kernel: Calibrating delay loop... 1264.84 BogoMIPS Nov 15 09:40:22 k3 kernel: Memory: 253284k/262080k available (3362k kernel code, 8412k reserved, 1256k data, 232k init, 0k hi Nov 15 09:40:22 k3 kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Nov 15 09:40:22 k3 kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Nov 15 09:40:22 k3 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes) Nov 15 09:40:22 k3 kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Nov 15 09:40:22 k3 kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Nov 15 09:40:22 k3 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Nov 15 09:40:22 k3 kernel: CPU: L2 cache: 128K Nov 15 09:40:22 k3 kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Nov 15 09:40:22 k3 kernel: CPU: Common caps: 0383f9ff 00000000 00000000 00000000 Nov 15 09:40:22 k3 kernel: Enabling fast FPU save and restore... done. Nov 15 09:40:22 k3 kernel: Enabling unmasked SIMD FPU exception support... done. Nov 15 09:40:22 k3 kernel: Checking 'hlt' instruction... OK. Nov 15 09:40:22 k3 kernel: ACPI: IRQ9 SCI: Level Trigger. Nov 15 09:40:23 k3 kernel: POSIX conformance testing by UNIFIX Nov 15 09:40:23 k3 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Nov 15 09:40:23 k3 kernel: mtrr: detected mtrr type: Intel Nov 15 09:40:23 k3 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Nov 15 09:40:23 k3 kernel: CPU: L2 cache: 128K Nov 15 09:40:23 k3 kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Nov 15 09:40:23 k3 kernel: CPU: Common caps: 0383f9ff 00000000 00000000 00000000 Nov 15 09:40:23 k3 kernel: CPU0: Intel Celeron (Coppermine) stepping 03 Nov 15 09:40:23 k3 kernel: per-CPU timeslice cutoff: 365.63 usecs. Nov 15 09:40:23 k3 kernel: SMP motherboard not detected. Nov 15 09:40:23 k3 kernel: Local APIC not detected. Using dummy APIC emulation. Nov 15 09:40:23 k3 kernel: Waiting on wait_init_idle (map = 0x0) Nov 15 09:40:23 k3 kernel: All processors have done init_idle Nov 15 09:40:23 k3 kernel: ACPI: Subsystem revision 20040326 Nov 15 09:40:23 k3 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1 Nov 15 09:40:23 k3 kernel: PCI: Using configuration type 1 Nov 15 09:40:23 k3 kernel: ACPI: Interpreter enabled Nov 15 09:40:23 k3 kernel: ACPI: Using PIC for interrupt routing Nov 15 09:40:23 k3 kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5) Nov 15 09:40:23 k3 kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Nov 15 09:40:23 k3 kernel: PCI: Probing PCI hardware (bus 00) Nov 15 09:40:23 k3 kernel: PCI: Via IRQ fixup Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) Nov 15 09:40:23 k3 kernel: PCI: Probing PCI hardware Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Nov 15 09:40:23 k3 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Nov 15 09:40:23 k3 kernel: PCI: Using ACPI for IRQ routing Nov 15 09:40:23 k3 kernel: PCI: Disabling Via external APIC routing Nov 15 09:40:23 k3 kernel: Linux NET4.0 for Linux 2.4 Nov 15 09:40:23 k3 kernel: Based upon Swansea University Computer Society NET3.039 Nov 15 09:40:23 k3 kernel: Initializing RT netlink socket Nov 15 09:40:23 k3 kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Nov 15 09:40:23 k3 kernel: apm: overridden by ACPI. Nov 15 09:40:23 k3 kernel: Starting kswapd Nov 15 09:40:23 k3 kernel: VFS: Disk quotas vdquot_6.5.1 Nov 15 09:40:23 k3 kernel: Journalled Block Device driver loaded Nov 15 09:40:23 k3 kernel: SGI XFS with no debug enabled Nov 15 09:40:23 k3 kernel: SGI XFS Quota Management subsystem Nov 15 09:40:23 k3 kernel: ACPI: Power Button (FF) [PWRF] Nov 15 09:40:23 k3 kernel: ACPI: Sleep Button (CM) [SLPB] Nov 15 09:40:23 k3 kernel: ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) Nov 15 09:40:23 k3 kernel: vga16fb: initializing Nov 15 09:40:23 k3 kernel: vga16fb: mapped to 0xc00a0000 Nov 15 09:40:23 k3 kernel: Console: switching to colour frame buffer device 80x30 Nov 15 09:40:23 k3 kernel: fb0: VGA16 VGA frame buffer device Nov 15 09:40:23 k3 kernel: Detected PS/2 Mouse Port. Nov 15 09:40:23 k3 kernel: pty: 512 Unix98 ptys configured Nov 15 09:40:23 k3 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Nov 15 09:40:23 k3 kernel: keyboard: Timeout - AT keyboard not present?(ed) Nov 15 09:40:23 k3 kernel: keyboard: Timeout - AT keyboard not present?(f4) Nov 15 09:40:23 k3 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Nov 15 09:40:23 k3 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Nov 15 09:40:23 k3 kernel: Real Time Clock Driver v1.10f Nov 15 09:40:23 k3 kernel: FDC 0 is a post-1991 82077 Nov 15 09:40:23 k3 kernel: RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize Nov 15 09:40:23 k3 kernel: loop: loaded (max 8 devices) Nov 15 09:40:23 k3 kernel: Compaq SMART2 Driver (v 2.4.28) Nov 15 09:40:23 k3 kernel: HP CISS Driver (v 2.4.60) Nov 15 09:40:23 k3 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Nov 15 09:40:23 k3 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 15 09:40:23 k3 kernel: VP_IDE: IDE controller at PCI slot 00:07.1 Nov 15 09:40:23 k3 kernel: VP_IDE: chipset revision 16 Nov 15 09:40:23 k3 kernel: VP_IDE: not 100%% native mode: will probe irqs later Nov 15 09:40:23 k3 kernel: VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 Nov 15 09:40:23 k3 kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio Nov 15 09:40:23 k3 kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio Nov 15 09:40:23 k3 kernel: hda: ST38422A, ATA DISK drive Nov 15 09:40:23 k3 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 15 09:40:23 k3 kernel: hda: attached ide-disk driver. Nov 15 09:40:23 k3 kernel: hda: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=16708/16/63 Nov 15 09:40:23 k3 kernel: Partition check: Nov 15 09:40:23 k3 kernel: hda: hda1 hda2 Nov 15 09:40:23 k3 kernel: SCSI subsystem driver Revision: 1.00 Nov 15 09:40:23 k3 kernel: sim710: No NCR53C710 adapter found. Nov 15 09:40:23 k3 kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5 Nov 15 09:40:23 k3 kernel: Detecting Adaptec I2O RAID controllers... Nov 15 09:40:23 k3 kernel: Red Hat/Adaptec aacraid driver (1.1-3 Jul 28 2006 18:00:41) Nov 15 09:40:23 k3 kernel: scsi: <fdomain> Detection failed (no card) Nov 15 09:40:23 k3 kernel: NCR53c406a: no available ports found Nov 15 09:40:23 k3 kernel: sym53c416.c: Version 1.0.0-ac Nov 15 09:40:23 k3 kernel: Failed initialization of WD-7000 SCSI card! Nov 15 09:40:24 k3 kernel: DC390: 0 adapters found Nov 15 09:40:24 k3 kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005) Nov 15 09:40:24 k3 kernel: aec671x_detect: Nov 15 09:40:24 k3 kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04 Nov 15 09:40:24 k3 kernel: GDT-HA: Found 0 PCI Storage RAID Controllers Nov 15 09:40:24 k3 kernel: 3ware Storage Controller device driver for Linux v1.02.00.037. Nov 15 09:40:24 k3 kernel: 3w-xxxx: No cards found. Nov 15 09:40:24 k3 kernel: nsp32: loading... Nov 15 09:40:24 k3 kernel: libata version 1.11 loaded. Nov 15 09:40:24 k3 kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Nov 15 09:40:24 k3 last message repeated 2 times Nov 15 09:40:24 k3 kernel: md: linear personality registered as nr 1 Nov 15 09:40:24 k3 kernel: md: raid0 personality registered as nr 2 Nov 15 09:40:24 k3 kernel: md: raid1 personality registered as nr 3 Nov 15 09:40:24 k3 kernel: md: raid5 personality registered as nr 4 Nov 15 09:40:24 k3 kernel: raid5: measuring checksumming speed Nov 15 09:40:24 k3 kernel: 8regs : 1169.600 MB/sec Nov 15 09:40:24 k3 kernel: 32regs : 568.800 MB/sec Nov 15 09:40:24 k3 kernel: pIII_sse : 1279.200 MB/sec Nov 15 09:40:24 k3 kernel: pII_mmx : 1432.800 MB/sec Nov 15 09:40:24 k3 kernel: p5_mmx : 1498.800 MB/sec Nov 15 09:40:24 k3 kernel: raid5: using function: pIII_sse (1279.200 MB/sec) Nov 15 09:40:24 k3 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Nov 15 09:40:24 k3 kernel: md: Autodetecting RAID arrays. Nov 15 09:40:24 k3 kernel: md: autorun ... Nov 15 09:40:24 k3 kernel: md: ... autorun DONE. Nov 15 09:40:24 k3 kernel: LVM version 1.0.8(17/11/2003) Nov 15 09:40:24 k3 kernel: Initializing Cryptographic API Nov 15 09:40:24 k3 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Nov 15 09:40:24 k3 kernel: IP Protocols: ICMP, UDP, TCP, IGMP Nov 15 09:40:24 k3 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Nov 15 09:40:24 k3 kernel: TCP: Hash tables configured (established 16384 bind 16384) Nov 15 09:40:24 k3 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Nov 15 09:40:24 k3 kernel: kjournald starting. Commit interval 5 seconds Nov 15 09:40:24 k3 kernel: EXT3-fs: mounted filesystem with ordered data mode. Nov 15 09:40:24 k3 kernel: VFS: Mounted root (ext3 filesystem) readonly. Nov 15 09:40:24 k3 kernel: Freeing unused kernel memory: 232k freed Nov 15 09:40:24 k3 kernel: Adding Swap: 32756k swap-space (priority -1) Nov 15 09:40:24 k3 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Nov 15 09:40:24 k3 kernel: 8139too Fast Ethernet driver 0.9.26 Nov 15 09:40:24 k3 kernel: eth0: RealTek RTL8139 at 0xd0823000, 00:e0:4c:09:43:d6, IRQ 10 Nov 15 09:40:24 k3 kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Nov 15 09:40:24 k3 kernel: eth1: RealTek RTL8139 at 0xd0825000, 00:0b:2b:12:ff:59, IRQ 11 Nov 15 09:40:24 k3 kernel: eth1: Identified 8139 chip type 'RTL-8100B/8139D' Nov 15 09:40:25 k3 kernel: ip_conntrack version 2.1 (2047 buckets, 16376 max) - 308 bytes per conntrack Nov 15 09:40:25 k3 kernel: ip_tables: (C) 2000-2002 Netfilter core team Nov 15 09:40:25 k3 kernel: eth1: link up, 10Mbps, half-duplex, lpa 0x0000 Nov 15 09:40:25 k3 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 Nov 15 09:40:29 k3 kernel: imq driver loaded. Nov 15 09:40:29 k3 kernel: ipt_time loading Nov 15 09:40:30 k3 kernel: HTB init, kernel part version 3.17 Nov 15 09:40:31 k3 kernel: HTB init, kernel part version 3.17 Nov 15 09:40:37 k3 kernel: IPP2P v0.8.1_rc1 loading Nov 15 09:40:40 k3 kernel: HTB init, kernel part version 3.17 Nov 15 09:40:42 k3 last message repeated 3 times Nov 15 09:41:00 k3 kernel: eth1: Promiscuous mode enabled. Nov 15 09:41:00 k3 kernel: device eth1 entered promiscuous mode i dalej ten sam komunikat w logach :( Cytuj: Nov 14 19:16:03 k3 kernel: hda: lost interrupt Nov 14 19:16:03 k3 kernel: hda: drive not ready for command

Autor:	Mis' [ środa, 15 listopada 2006, 15:16 ]
Tytuł:
-MW- pisze: po zmianie dysku. troche to dlugie ale moze ktos skomentuje czy tu sie mozna do czegos doczepic? Cytuj: ciach dmesg nastę[pnym razem połóż to gdzieś na www i daj link. Ja w tym logu nie widzę nic dziwnego. IMHO wszytsko OK.

Autor:	-MW- [ piątek, 17 listopada 2006, 09:18 ]
Tytuł:
to nie byl problem sprzetu lecz oprogramowania, cos zmienilem w swoich skryptach i taki byl efekt, po podmianie skryptow na starsze przed zmianami wszystko powrocilo do normy. ... a guzik wrocilo - nieco mniej ale dalej sie wiesza.

Autor:	tasiorek [ piątek, 17 listopada 2006, 09:22 ]
Tytuł:
Watpie (chybe, ze kombinowales z hdparmem). Byc moze zmienione skrypty nie korzystaja z uszkodzonej czesci dysku.

Autor:	-MW- [ czwartek, 23 listopada 2006, 00:55 ]
Tytuł:
a czy ktos wykorzystuje kernel 2.4.32-10nnd z l7 i ma wlaczona dopalke dysku hdparm -c1 -d1 -k1 /dev/hda u mnie zawiesza to system !?!? jakis czas temu kiedy zmienialem wersje kernela wylaczylem ta funkcje w obawie ze kiedys cos sie stanie, i tak przyszlo mi do glowy ze to repo testowe i moze w tym kernelu nie wszystko gra? wracam do normalnej wersji nnd

Autor:	Orzel [ piątek, 24 listopada 2006, 10:14 ]
Tytuł:
miałem podobnie system stawał dęba i wyświetlał "hda: lost interrupt" a to wszystko po wymianie dysku na nowy. Pomogło dopisanie hdparm -c0 -d1 -u0 /dev/hda hdparm -c0 -d1 -u0 /dev/hdb hdparm -c0 -d1 -u0 /dev/hdc w /etc/rc.d/rc.local hdb i hdc dopisałem profilaktycznie Pozdrawiam

Autor:	-MW- [ piątek, 24 listopada 2006, 15:09 ]
Tytuł:
to nie jest wina sprzetu, dzieje sie tak na kilku roznych kompach. komunikaty o hda nie wyskakuja. problem wystepuje w czesie najwiekszego obciazenia. w logu crona jedynie widac prube uruchomienia tego samego procesu. ktory juz jest uruchomiony i nie wukonany do konca, nie zakonczony. a proces uruchamia sie regularnie co 5 min.

Autor:	-MW- [ sobota, 25 listopada 2006, 20:46 ]
Tytuł:
a moze spotakl sie ktos z sytuacja gdy na routerze zmienia sie czas, a wlasciwie jest to wynikiem zwiechy systemu. przez czas awarii czas nie jest liczony, a po ponownywnym "odwieszeniu " sie routera czas jest cofniety o okres awaryjnej pracy. jak wstanie to dziala dalej i wydaje sie ze normalnie pracuje przez jakis okres az do nastepnej zwiechy. ps. i nie jest to wina sprzetu gdyz problem o ktorym zaczolem pisac wystepowal na kompie ktorego juz nie ma, w jego miejsce stoi inny z nnd z lipca i niczym z repo testowego. natomias sytuacja powtarza sie na kompie o identycznej konfiguracji jak pierwszego routera czyli nnd z lipca + 7l a co za tym idzie kernel 32-10 i iptables chyba 1.3.4

Strona 1 z 1	Strefa czasowa UTC+2godz.
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Autor:	tasiorek [ wtorek, 14 listopada 2006, 21:43 ]
Tytuł:
Ja do niczego nie namawialem, opisalem tylko swoj problem. Logi oznaczaja dokladnie to, co Ci napisal Mis: dysk, tasma, lub kontroler. Dokladnie w takiej kolejnosci.

Autor:	-MW- [ wtorek, 14 listopada 2006, 21:50 ]
Tytuł:
ale ja nie twierdze ze zmiana serwera dns wyszla mi na zle zaluje tylko ze klienci maja wpisany adres bramy jako dns, bylo dac tpsy i mialbym spokuj, im prostsza konfiguracja routera tym mniejsza szansa ze cos sie wysypie zmienie dysk na inny z systemem instalowanym na tej wlasnie maszynie. a tak przy okazji, kazdy klient siedzi w osobnej podsieci (aliasy)zaczynajac od 192.168.0.0/29 itd. i kazdy ma wpisany adres bramy jako dns czyli np 192.168.0.1 itd. ma to jakis wplyw na funkcjonowanie serwera dns? a co do Cytuj: oczywiście aktualny backup masz, prawda? mam magiczny skrypcik kopiujacy wszystkie niezbedne pliki do archiwum, gdyby nawet nie to jest router z identyczna konfiguracja. poniewaz cala siec to dwie odrebne sieci, ktore kiedys stanowily calosc. klienci przelaczaja sie czasem miedzy nadajnikami wiec postanowilem ze obie sieci beda mialy identyczna konfiguracje tak jakby dalej byla to jedna siec, a nie wszyscy potrafia sprawdzic z jakiego ip wlasnie chodza

Autor:	-MW- [ czwartek, 23 listopada 2006, 23:22 ]
Tytuł:
co dziwnego ostatnio zauwazylem: pingujac ping www.onet.pl z routera mam stracone pakiety a w tym samym czasie od siebie z kompa ida idealnie i wszystkie.