Freesco, NND, CDN, EOS
http://forum.freesco.pl/

startadsl bład
http://forum.freesco.pl/viewtopic.php?f=22&t=7251		 Strona 1 z 1
Autor:  pawl00 [ środa, 30 marca 2005, 01:06 ]
Tytuł:  startadsl bład
Dzisiaj w nocy zerwało mi samo polaczenie pierwszy raz od 2 tygodni ;-) wiec wzielem startadsl a tu mi wyskoczyl bład:
: [/] [] ()
[root@router_nnd pawl00]# startadsl
/usr/sbin/fctStartAdsl: line 169: 15643 Segmentation fault      pppd file $
OPTIONS >&/dev/null
Nie udało się nawiązać połączenia!
GeSHi © Codebox Plus

Musialem restenac serwer, po resecie sam sie poąłczył ;-)
p.s nowe nnd 22.01.2005, pppd 2.4.2, net_conf0.54
p.s2 pierwszy raz mi sie takie cos zdarzylo
Autor:  Anonymous [ środa, 30 marca 2005, 12:46 ]
Tytuł: 
a w /etc/ppp/pppoe.conf masz taki wpis:

: [/] [] ()
CONNECT_TIMEOUT=30
GeSHi © Codebox Plus



dokladnie nie pamietam liczby jaka jest wpisana pod ta zmienna ale radzilbym wpisac 0 w takim wypadku bedzie probowal nawiazac polaczenie tak dlugo az je nawiaze a nie ze po uplywie 30 sekund po prostu przestanie je nawiazywac. Przydatne w przypadku jak nie masz fizycznego kontaktu z serwerem i wlasnie rowniez wtedy mozna uniknac czegos takiego jak Tobie sie przytrafilo :)
Autor:  MAC!EK [ środa, 30 marca 2005, 15:57 ]
Tytuł: 
widget pisze:
a w /etc/ppp/pppoe.conf masz taki wpis:

: [/] [] ()
CONNECT_TIMEOUT=30
GeSHi © Codebox Plus


ten plik jest dla neo na modemi RJ
a z tego co widze to kolega ma chyba neo na sagemie bo odpala startadsl
Trzeba było wpisać /etc/rc.d/internet restart
albo podać jakieś logi bo może się coś wysypało
Autor:  Anonymous [ środa, 30 marca 2005, 16:05 ]
Tytuł: 
aha.....no to tego si enie domyslilem :) powiedzialem na swoim przykladzie :)
Autor:  pawl00 [ środa, 30 marca 2005, 16:25 ]
Tytuł: 
w logach znalazlem cos takiego
: [/] [] ()
Mar 30 00:44:50 router_nnd pppd[385]: No response to 5 echo-requests
Mar 30 00:44:50 router_nnd pppd[385]: Serial link appears to be disconnected.
Mar 30 00:44:56 router_nnd pppd[385]: Connection terminated.
Mar 30 00:44:56 router_nnd pppd[385]: Connect time 309.2 minutes.
Mar 30 00:44:56 router_nnd pppd[385]: Sent 49636267 bytes, received 434035185 bytes.
Mar 30 00:44:56 router_nnd pppd[385]: Using interface ppp0
Mar 30 00:44:56 router_nnd pppd[385]: Connect: ppp0 <--> /dev/pts/2
Mar 30 00:45:27 router_nnd pppd[385]: LCP: timeout sending Config-Requests
Mar 30 00:45:27 router_nnd pppd[385]: Connection terminated.
Mar 30 00:45:27 router_nnd pppd[385]: Connect time 309.2 minutes.
Mar 30 00:45:27 router_nnd pppd[385]: Sent 49636267 bytes, received 434035185 bytes.
Mar 30 00:45:27 router_nnd pppd[385]: Using interface ppp0
Mar 30 00:45:27 router_nnd pppd[385]: Connect: ppp0 <--> /dev/pts/0
Mar 30 00:45:35 router_nnd pppd[385]: Terminating on signal 15.
Mar 30 00:45:38 router_nnd last message repeated 8606 times
Mar 30 00:45:38 router_nnd pppd[385]: Terminating on signal 15.
Mar 30 00:45:39 router_nnd last message repeated 1469 times
Mar 30 00:45:54 router_nnd pppd[14464]: pppd 2.4.2 started by lol, uid 0
Mar 30 00:45:54 router_nnd pppd[14464]: Using interface ppp0
Mar 30 00:45:54 router_nnd pppd[14464]: Connect: ppp0 <--> /dev/pts/0
Mar 30 00:46:25 router_nnd pppd[14464]: LCP: timeout sending Config-Requests
Mar 30 00:46:25 router_nnd pppd[14464]: Connection terminated.
Mar 30 00:46:25 router_nnd pppd[14464]: Using interface ppp0
Mar 30 00:46:25 router_nnd pppd[14464]: Connect: ppp0 <--> /dev/pts/0
Mar 30 00:46:28 router_nnd pppd[14464]: Hangup (SIGHUP)
Mar 30 00:46:32 router_nnd last message repeated 10076 times
Mar 30 00:47:08 router_nnd pppd[14698]: pppd 2.4.2 started by lol, uid 0
Mar 30 00:47:08 router_nnd pppd[14698]: Using interface ppp0
Mar 30 00:47:08 router_nnd pppd[14698]: Connect: ppp0 <--> /dev/pts/2
Mar 30 00:47:37 router_nnd pppd[14698]: Terminating on signal 2.
Mar 30 00:47:42 router_nnd last message repeated 6576 times
Mar 30 00:47:42 router_nnd pppd[14698]: Hangup (SIGHUP)
Mar 30 00:47:45 router_nnd last message repeated 3499 times
Mar 30 00:49:53 router_nnd pppd[15166]: pppd 2.4.2 started by root, uid 0
Mar 30 00:49:53 router_nnd pppd[15166]: Using interface ppp0
Mar 30 00:49:53 router_nnd pppd[15166]: Connect: ppp0 <--> /dev/pts/3
Mar 30 00:50:03 router_nnd pppd[15166]: Terminating on signal 2.
Mar 30 00:50:09 router_nnd last message repeated 10075 times
Mar 30 00:51:51 router_nnd logger: Nie można ręcznie uruchomić tego skryptu!
Mar 30 00:52:24 router_nnd pppd[15643]: pppd 2.4.2 started by lol, uid 0
Mar 30 00:52:24 router_nnd pppd[15643]: Using interface ppp0
Mar 30 00:52:24 router_nnd pppd[15643]: Connect: ppp0 <--> /dev/pts/2
Mar 30 00:52:55 router_nnd pppd[15643]: LCP: timeout sending Config-Requests
Mar 30 00:52:55 router_nnd pppd[15643]: Connection terminated.
Mar 30 00:52:55 router_nnd pppd[15643]: Using interface ppp0
Mar 30 00:52:55 router_nnd pppd[15643]: Connect: ppp0 <--> /dev/pts/2
Mar 30 00:52:58 router_nnd pppd[15643]: Terminating on signal 2.
Mar 30 00:53:03 router_nnd last message repeated 10076 times
Mar 30 00:54:23 router_nnd pppd[15842]: pppd 2.4.2 started by root, uid 0
Mar 30 00:54:23 router_nnd pppd[15842]: Using interface ppp0
Mar 30 00:54:23 router_nnd pppd[15842]: Connect: ppp0 <--> /dev/pts/3
Mar 30 00:54:47 router_nnd pppd[15842]: Terminating on signal 2.
Mar 30 00:54:56 router_nnd last message repeated 10075 times
Mar 30 00:56:13 router_nnd pppd[16367]: pppd 2.4.2 started by lol, uid 0
Mar 30 00:56:13 router_nnd pppd[16367]: Using interface ppp0
Mar 30 00:56:13 router_nnd pppd[16367]: Connect: ppp0 <--> /dev/pts/2
Mar 30 00:56:39 router_nnd pppd[16367]: Hangup (SIGHUP)
Mar 30 00:56:44 router_nnd last message repeated 10076 times

GeSHi © Codebox Plus


p.s ciekawe czy to cos pomoze ;)
Autor:  MAC!EK [ środa, 30 marca 2005, 22:35 ]
Tytuł: 
jakiś przyszłościowy log :>

a tak na serio to nie wiem co to mogło się stać, może jakiś pan z tpsa na drugim końcu kabla podpiął 220V pod twój kabel :)
Strona 1 z 1 Strefa czasowa UTC+2godz.
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/