knoppix@1[knoppix]$ lspci
0000:00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
0000:00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
0000:00:06.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC (rev 7a)
0000:00:08.0 System peripheral: American Megatrends Inc. MegaRAC (rev 04)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f)
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
0000:00:11.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
0000:00:11.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
0000:06:04.0 PCI bridge: Intel Corp. 80960RM [i960RM Bridge] (rev 01)
0000:06:04.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller 3/Di (rev01)
0000:07:04.0 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)
0000:07:04.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
0000:07:06.0 SCSI storage controller: Adaptec AIC-7880U (rev 02)
0000:08:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)

knoppix@1[knoppix]$ dmesg
Linux version 2.6.11 (root@Knoppix) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #3
SMP Mon May 2 00:19:56 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 000000001fffe000 (usable)
 BIOS-e820: 000000001fffe000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 131070
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126974 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x000fdc90
ACPI: RSDT (v001 DELL   PE4400   0x00000001 MSFT 0x0100000a) @ 0x000fdca4
ACPI: FADT (v001 DELL   PE4400   0x00000001 MSFT 0x0100000a) @ 0x000fdcd0
ACPI: MADT (v001 DELL   PE4400   0x00000001 MSFT 0x0100000a) @ 0x000fdd44
ACPI: DSDT (v001 DELL   PE4400   0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: BIOS age (2001) fails cutoff (2002), acpi=force is required to enable ACP
I
ACPI: Disabling ACPI support
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: DELL     Product ID: POWEREDGE 9A APIC at: 0xFEE00000
Processor #1 6:8 APIC version 17
Processor #0 6:8 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFEC01000.
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Processors: 2
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off v
ga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
__iounmap: bad address c00fffd9
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 664.933 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513212k/524280k available (1846k kernel code, 10396k reserved, 943k dat
a, 292k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1310.72 BogoMIPS (lpj=655360)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000
 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 000000
00 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: Intel Pentium III (Coppermine) stepping 01
per-CPU timeslice cutoff: 732.06 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/0 eip 3000
Initializing CPU#1
Calibrating delay loop... 1327.10 BogoMIPS (lpj=663552)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000
 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 000000
00 00000000
CPU1: Intel Pentium III (Coppermine) stepping 01
Total of 2 processors activated (2637.82 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1082k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfc74e, last bus=8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered peer bus 06
PCI: Discovered peer bus 08
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:06:04.1[A] -> IRQ 31
PCI->APIC IRQ transform: 0000:07:04.0[A] -> IRQ 31
PCI->APIC IRQ transform: 0000:07:04.1[B] -> IRQ 24
PCI->APIC IRQ transform: 0000:07:06.0[A] -> IRQ 25
PCI->APIC IRQ transform: 0000:08:04.0[A] -> IRQ 21
pnp: 00:00: ioport range 0x800-0x83f has been reserved
pnp: 00:00: ioport range 0x580-0x58f has been reserved
pnp: 00:00: ioport range 0x900-0x97f has been reserved
pnp: 00:11: ioport range 0xc00-0xc01 has been reserved
pnp: 00:11: ioport range 0xc06-0xc08 has been reserved
pnp: 00:11: ioport range 0xc14-0xc14 has been reserved
pnp: 00:11: ioport range 0xc50-0xc52 has been reserved
pnp: 00:11: ioport range 0xc6c-0xc6f has been reserved
pnp: 00:11: ioport range 0xcd6-0xcd7 has been reserved
pnp: 00:11: ioport range 0xf50-0xf57 has been reserved
audit: initializing netlink socket (disabled)
audit(1121697743.006:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xfd000000, mapped to 0xe0880000, using 3072k, total 409
6k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:4b34
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: Serverworks LE detected. Write-combining disabled.
mtrr: your processor doesn't support write-combining
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
libata version 1.10 loaded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 15
Starting balanced_irq
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

(scsi0:A:6): 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
  Vendor: QUANTUM   Model: DLT7000           Rev: 2561
  Type:   Sequential-Access                  ANSI SCSI revision: 02
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7880 Ultra SCSI adapter>
        aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs

(scsi1:A:5): 20.000MB/s transfers (20.000MHz, offset 15)
  Vendor: NEC       Model: CD-ROM DRIVE:466  Rev: 1.06
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
ohci_hcd 0000:00:0f.2: irq 11, pci mem 0xfeb00000
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ub: sizeof ub_scsi_cmd 64 ub_dev 2504
usbcore: registered new driver ub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 30413 blocks, 65536 bytes/block, largest block i
s 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp
 $
Freeing unused kernel memory: 292k freed
Real Time Clock Driver v1.12
apm: BIOS not found.
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,E
CP]
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xf3f00000, irq 21, MAC addr 00:D0:B7:47:4E:7D
Red Hat/Adaptec aacraid driver (1.1.2-lk2 May  1 2005)
AAC0: kernel 2.1.4 build 2951
AAC0: monitor 2.1.4 build 2951
AAC0: bios 2.1.0 build 2951
AAC0: serial 4e4931d1fafaf001
scsi2 : percraid
  Vendor: DELL      Model: PERC Volume       Rev: V1.0
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 213274368 512-byte hdwr sectors (109196 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
SCSI device sda: 213274368 512-byte hdwr sectors (109196 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
 sda: unknown partition table
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
Linux agpgart interface v0.100 (c) Dave Jones
apm: BIOS not found.
mtrr: Serverworks LE detected. Write-combining disabled.
mtrr: your processor doesn't support write-combining
mtrr: Serverworks LE detected. Write-combining disabled.
mtrr: your processor doesn't support write-combining
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex