Freesco, NND, CDN, EOS
http://forum.freesco.pl/

/bin/mgetty: Can't init modem /dev/cua1 with ATZ
http://forum.freesco.pl/viewtopic.php?f=35&t=3124		 Strona 1 z 1
Autor:  pasztet [ środa, 5 listopada 2003, 00:34 ]
Tytuł:  /bin/mgetty: Can't init modem /dev/cua1 with ATZ
Witam mam nastepujacy problem:jak nie postawie freesco to po jakims czasie mi sie wiesza ile razy bym nie stawial do nowa to sam.
mam podBaczonych 6 osób freesco na hdd
ustawione jako etherenet router do tego mam justica i mc
log po zwisie wyglada tak:
Nov 4 12:13:20 - syslogd 1.3-3: restart (remote reception).
Nov 4 12:13:21 - kernel: Kernel logging (proc) started.
Nov 4 12:13:21 - kernel: Memory: sized by int13 088h
Nov 4 12:13:21 - kernel: Console: 16 point font, 480 scans
Nov 4 12:13:21 - kernel: Console: colour VGA+ 80x30, 1 virtual console (max 63)
Nov 4 12:13:21 - kernel: pcibios_init : BIOS32 Service Directory structure at 0x000fb110
Nov 4 12:13:21 - kernel: pcibios_init : BIOS32 Service Directory entry at 0xfb510
Nov 4 12:13:21 - kernel: pcibios_init : PCI BIOS revision 2.10 entry at 0xfb540
Nov 4 12:13:21 - kernel: Probing PCI hardware.
Nov 4 12:13:21 - kernel: Calibrating delay loop.. ok - 399.77 BogoMIPS
Nov 4 12:13:21 - kernel: Memory: 30276k/32768k available (696k kernel code, 384k reserved, 724k data)
Nov 4 12:13:21 - kernel: Swansea University Computer Society NET3.035 for Linux 2.0
Nov 4 12:13:21 - kernel: NET3: Unix domain sockets 0.13 for Linux NET3.035.
Nov 4 12:13:21 - kernel: Swansea University Computer Society TCP/IP for NET3.034
Nov 4 12:13:21 - kernel: IP Protocols: IGMP, ICMP, UDP, TCP
Nov 4 12:13:21 - kernel: Linux IP multicast router 0.07.
Nov 4 12:13:21 - kernel: Checking 'hlt' instruction... disabled
Nov 4 12:13:21 - kernel: Intel Pentium with F0 0F bug - workaround enabled.
Nov 4 12:13:21 - kernel: alias mapping IDT readonly ... ... done
Nov 4 12:13:21 - kernel: Linux version 2.0.38 (root@localhost.localdomain) (gcc version 2.7.2.3) #4 Wed May 17 22:55:01 EDT 2000
Nov 4 12:13:21 - kernel: Starting kswapd v 1.4.2.2
Nov 4 12:13:21 - kernel: Serial driver version 4.13p1 with no serial options enabled
Nov 4 12:13:21 - kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 4 12:13:21 - kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 4 12:13:21 - kernel: lp1 at 0x0378, (polling)
Nov 4 12:13:21 - kernel: Real Time Clock Driver v1.09
Nov 4 12:13:21 - kernel: Ramdisk driver initialized : 16 ramdisks of 4096K size
Nov 4 12:13:21 - kernel: loop: registered device at major 7
Nov 4 12:13:21 - kernel: hda: Conner Peripherals 240MB - CP30254, 240MB w/32kB Cache, CHS=447/20/55
Nov 4 12:13:21 - kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 4 12:13:21 - kernel: Floppy drive(s): fd0 is 1.44M
Nov 4 12:13:21 - kernel: FDC 0 is a post-1991 82077
Nov 4 12:13:21 - kernel: Ethernet Bridge 002 for NET3.035 (Linux 2.0)
Nov 4 12:13:21 - kernel: PPP: version 2.3.10 (demand dialling)
Nov 4 12:13:21 - kernel: TCP compression code copyright 1989 Regents of the University of California
Nov 4 12:13:21 - kernel: PPP line discipline registered.
Nov 4 12:13:21 - kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
Nov 4 12:13:21 - kernel: CSLIP: code copyright 1989 Regents of the University of California.
Nov 4 12:13:21 - kernel: Partition check:
Nov 4 12:13:21 - kernel: hda: hda1
Nov 4 12:13:21 - kernel: RAMDISK: Compressed image found at block 0
Nov 4 12:13:21 - kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
Nov 4 12:13:21 - kernel: VFS: Mounted root (ext2 filesystem).
Nov 4 12:13:21 - kernel: UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
Nov 4 12:13:22 - syslogd 1.3-3: restart (remote reception).
Nov 4 12:13:23 - kernel: ip_masq_icq: using TCP port range 60200-61000
Nov 4 12:13:23 - kernel: ip_masq_icq: loaded support on port 4000/UDP
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - last message repeated 7 times
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.A0 failed
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.B0 failed
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.A0 failed
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.B0 failed
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - last message repeated 7 times
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.A1 failed
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.B1 failed
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.A1 failed
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.B1 failed
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - last message repeated 7 times
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.A2 failed
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.B2 failed
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - insmod: Symbol 'io' not found
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.A2 failed
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.B2 failed
Nov 4 12:13:23 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/3c509.o.C failed
Nov 4 12:13:23 - kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/3c59x.o.C failed
Nov 4 12:13:23 - kernel: ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/ne2k-pci.o.C failed
Nov 4 12:13:23 - kernel: rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
Nov 4 12:13:23 - kernel: eth0: RealTek RTL8139 Fast Ethernet at 0x6100, IRQ 10, 00:50:bf:ff:59:7e.
Nov 4 12:13:23 - kernel: eth1: RealTek RTL8139 Fast Ethernet at 0x6200, IRQ 9, 00:02:44:56:e0:09.
Nov 4 12:13:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 12:13:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/smc-ultra.o.C failed
Nov 4 12:13:23 - insmod: Initialization of /tmp/net/tulip.o.C failed
Nov 4 12:13:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 12:13:23 - insmod: Initialization of /tmp/prm/ne.o.C failed
Nov 4 12:13:25 - mode: User 'init' issued 'mode ethernet'
Nov 04 12:13:26 localhost thttpd[313]: thttpd/2.05 09nov99 starting on port 1986
Nov 04 12:13:26 localhost thttpd[313]: started as root without requesting chroot(), warning only
Nov 04 12:13:26 localhost thttpd[317]: thttpd/2.05 09nov99 starting on port 80
Nov 04 12:13:26 localhost thttpd[317]: started as root without requesting chroot(), warning only
Nov 4 12:13:26 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 12:13:26 - kernel: Traffic shaper initialised.
Nov 4 12:13:26 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 12:13:26 - kernel: Traffic shaper initialised.
Nov 4 12:13:26 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 12:13:26 - kernel: Traffic shaper initialised.
Nov 4 12:13:26 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 12:13:26 - kernel: Traffic shaper initialised.
Nov 4 12:13:26 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 12:13:26 - kernel: Traffic shaper initialised.
Nov 4 12:13:26 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 12:13:26 - kernel: Traffic shaper initialised.
Nov 4 12:13:41 - /bin/mgetty: Can't init modem /dev/cua1 with ATZ
Nov 4 12:14:12 - last message repeated 2 times
Nov 4 12:15:13 - last message repeated 4 times
Nov 4 12:16:14 - last message repeated 4 times
Nov 4 12:17:15 - last message repeated 4 times
Nov 4 12:18:31 - last message repeated 5 times
Nov 4 12:19:32 - last message repeated 4 times
Nov 4 12:20:33 - last message repeated 4 times


ten wpis ''/bin/mgetty: Can't init modem /dev/cua1 with ATZ"
powtarza siwe przy kazdym zawieszeniu i nie wiem o co moze chodzic z tym modemem skoro ustawine jest jako ethernet router i neta mam przez sieciowke.
moze mi ktos pomoze z gory dzieki
Autor:  JurekW [ środa, 5 listopada 2003, 01:28 ]
Tytuł:  Re: /bin/mgetty: Can't init modem /dev/cua1 with ATZ
pasztet pisze:
ten wpis ''/bin/mgetty: Can't init modem /dev/cua1 with ATZ"
powtarza siwe przy kazdym zawieszeniu i nie wiem o co moze chodzic z tym modemem skoro ustawine jest jako ethernet router i neta mam przez sieciowke.

Wejdź do setup-u freesco i wybierz autodetekcję modemu - jeśli go nie masz (a rozumiem, że nie masz), to freesco usunie go z setup-u i przestanie próbować się z nim łączyć. Na pewno są inne metody pozbycia się modemu - to jest tylko jedna z nich.
Pytanie tylko, czy to jest rzeczywista przyczyna zwisów freesco. Ale to Ci "wyjdzie w praniu" :)

Pozdrawiam
Autor:  pasztet [ środa, 5 listopada 2003, 09:25 ]
Tytuł:  to nie to
niestety to nie to teraz log wyglada tak:
Nov 4 21:12:36 - syslogd 1.3-3: restart (remote reception).
Nov 4 21:12:37 - kernel: Kernel logging (proc) started.
Nov 4 21:12:37 - kernel: Memory: sized by int13 088h
Nov 4 21:12:37 - kernel: Console: 16 point font, 480 scans
Nov 4 21:12:37 - kernel: Console: colour VGA+ 80x30, 1 virtual console (max 63)
Nov 4 21:12:37 - kernel: pcibios_init : BIOS32 Service Directory structure at 0x000fb110
Nov 4 21:12:37 - kernel: pcibios_init : BIOS32 Service Directory entry at 0xfb510
Nov 4 21:12:37 - kernel: pcibios_init : PCI BIOS revision 2.10 entry at 0xfb540
Nov 4 21:12:37 - kernel: Probing PCI hardware.
Nov 4 21:12:37 - kernel: Calibrating delay loop.. ok - 399.77 BogoMIPS
Nov 4 21:12:37 - kernel: Memory: 30276k/32768k available (696k kernel code, 384k reserved, 724k data)
Nov 4 21:12:37 - kernel: Swansea University Computer Society NET3.035 for Linux 2.0
Nov 4 21:12:37 - kernel: NET3: Unix domain sockets 0.13 for Linux NET3.035.
Nov 4 21:12:37 - kernel: Swansea University Computer Society TCP/IP for NET3.034
Nov 4 21:12:37 - kernel: IP Protocols: IGMP, ICMP, UDP, TCP
Nov 4 21:12:37 - kernel: Linux IP multicast router 0.07.
Nov 4 21:12:37 - kernel: Checking 'hlt' instruction... disabled
Nov 4 21:12:37 - kernel: Intel Pentium with F0 0F bug - workaround enabled.
Nov 4 21:12:37 - kernel: alias mapping IDT readonly ... ... done
Nov 4 21:12:37 - kernel: Linux version 2.0.38 (root@localhost.localdomain) (gcc version 2.7.2.3) #4 Wed May 17 22:55:01 EDT 2000
Nov 4 21:12:37 - kernel: Starting kswapd v 1.4.2.2
Nov 4 21:12:37 - kernel: Serial driver version 4.13p1 with no serial options enabled
Nov 4 21:12:37 - kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 4 21:12:37 - kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 4 21:12:37 - kernel: lp1 at 0x0378, (polling)
Nov 4 21:12:37 - kernel: Real Time Clock Driver v1.09
Nov 4 21:12:37 - kernel: Ramdisk driver initialized : 16 ramdisks of 4096K size
Nov 4 21:12:37 - kernel: loop: registered device at major 7
Nov 4 21:12:37 - kernel: hda: Conner Peripherals 240MB - CP30254, 240MB w/32kB Cache, CHS=447/20/55
Nov 4 21:12:37 - kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 4 21:12:37 - kernel: Floppy drive(s): fd0 is 1.44M
Nov 4 21:12:37 - kernel: FDC 0 is a post-1991 82077
Nov 4 21:12:37 - kernel: Ethernet Bridge 002 for NET3.035 (Linux 2.0)
Nov 4 21:12:37 - kernel: PPP: version 2.3.10 (demand dialling)
Nov 4 21:12:37 - kernel: TCP compression code copyright 1989 Regents of the University of California
Nov 4 21:12:37 - kernel: PPP line discipline registered.
Nov 4 21:12:37 - kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
Nov 4 21:12:37 - kernel: CSLIP: code copyright 1989 Regents of the University of California.
Nov 4 21:12:37 - kernel: Partition check:
Nov 4 21:12:37 - kernel: hda: hda1
Nov 4 21:12:37 - kernel: RAMDISK: Compressed image found at block 0
Nov 4 21:12:37 - kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
Nov 4 21:12:37 - kernel: VFS: Mounted root (ext2 filesystem).
Nov 4 21:12:37 - kernel: UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
Nov 4 21:12:38 - syslogd 1.3-3: restart (remote reception).
Nov 4 21:12:39 - kernel: ip_masq_icq: using TCP port range 60200-61000
Nov 4 21:12:39 - kernel: ip_masq_icq: loaded support on port 4000/UDP
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - last message repeated 7 times
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.A0 failed
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.B0 failed
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.A0 failed
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.B0 failed
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - last message repeated 7 times
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.A1 failed
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.B1 failed
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.A1 failed
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.B1 failed
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - last message repeated 7 times
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.A2 failed
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.B2 failed
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - insmod: Symbol 'io' not found
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.A2 failed
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.B2 failed
Nov 4 21:12:39 - insmod: Cannot open /mnt/router/drv/*.o
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/3c509.o.C failed
Nov 4 21:12:39 - kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/3c59x.o.C failed
Nov 4 21:12:39 - kernel: ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/ne2k-pci.o.C failed
Nov 4 21:12:39 - kernel: rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
Nov 4 21:12:39 - kernel: eth0: RealTek RTL8139 Fast Ethernet at 0x6100, IRQ 10, 00:50:bf:ff:59:7e.
Nov 4 21:12:39 - kernel: eth1: RealTek RTL8139 Fast Ethernet at 0x6200, IRQ 9, 00:02:44:56:e0:09.
Nov 4 21:12:39 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 4 21:12:39 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/smc-ultra.o.C failed
Nov 4 21:12:39 - insmod: Initialization of /tmp/net/tulip.o.C failed
Nov 4 21:12:39 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 4 21:12:39 - insmod: Initialization of /tmp/prm/ne.o.C failed
Nov 4 21:12:40 - mode: User 'init' issued 'mode ethernet'
Nov 04 21:12:42 localhost thttpd[313]: thttpd/2.05 09nov99 starting on port 23
Nov 04 21:12:42 localhost thttpd[313]: started as root without requesting chroot(), warning only
Nov 04 21:12:42 localhost thttpd[317]: thttpd/2.05 09nov99 starting on port 80
Nov 04 21:12:42 localhost thttpd[317]: started as root without requesting chroot(), warning only
Nov 4 21:12:42 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 21:12:42 - kernel: Traffic shaper initialised.
Nov 4 21:12:42 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 21:12:42 - kernel: Traffic shaper initialised.
Nov 4 21:12:42 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 21:12:42 - kernel: Traffic shaper initialised.
Nov 4 21:12:42 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 21:12:42 - kernel: Traffic shaper initialised.
Nov 4 21:12:42 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 21:12:42 - kernel: Traffic shaper initialised.
Nov 4 21:12:43 - kernel: Traffic Shaper 0.05 for Linux 2.0 <alan@redhat.com>
Nov 4 21:12:43 - kernel: Traffic shaper initialised.
Nov 4 21:14:38 - dhcpd: Both dynamic and static leases present for 10.0.0.2.
Nov 4 21:14:38 - dhcpd: Either remove host declaration pie or remove 10.0.0.2
Nov 4 21:14:38 - dhcpd: from the dynamic address pool for 10.0.0.0
Nov 4 21:14:38 - dhcpd: DHCPREQUEST for 10.0.0.2 from 00:a0:c9:cd:8e:1c via eth1
Nov 4 21:14:38 - dhcpd: DHCPACK on 10.0.0.2 to 00:a0:c9:cd:8e:1c via eth1



Moze ktos mi wyjasni oc chodzi??i czemu sie wiesz??
Autor:  JurekW [ środa, 5 listopada 2003, 12:20 ]
Tytuł: 
Cytuj:
Nov 4 21:14:38 - dhcpd: Both dynamic and static leases present for 10.0.0.2.
Nov 4 21:14:38 - dhcpd: Either remove host declaration pie or remove 10.0.0.2
Nov 4 21:14:38 - dhcpd: from the dynamic address pool for 10.0.0.0
Nov 4 21:14:38 - dhcpd: DHCPREQUEST for 10.0.0.2 from 00:a0:c9:cd:8e:1c via eth1
Nov 4 21:14:38 - dhcpd: DHCPACK on 10.0.0.2 to 00:a0:c9:cd:8e:1c via eth1

Masz niepoprawnie skonfigurowany serwer DHCP. Zakres numerów IP przydzielnanych dynamicznie (opcja 736 dla eth1 w setupie) pokrywa się z IP przydzielonymi statycznie w dhcpd.conf.
Ale, IMHO to też nie jest przyczyna zawieszania sie freesco. Może podaj więcej szczegółów, co się dzieje z freesco: nie można zalogować się z sieci (telnet, ssh, control panel), czy w ogóle jest "martwe". Może to wina sprzętu?

Pozdrawiam
Autor:  nufel [ środa, 5 listopada 2003, 15:42 ]
Tytuł: 
:idea: tylko nie cytuj tu już całych i configów, OK :?: Tylko fragment i chwacit :wink:
Autor:  pasztet [ środa, 5 listopada 2003, 17:49 ]
Tytuł: 
pada od strny sieci lokalnej.z servera moge pingowac serwery w necie ale ni widzi kompow w sieci kokalnej,i na odwrot siec lokalna nie widzi servera
Autor:  JurekW [ środa, 5 listopada 2003, 19:02 ]
Tytuł: 
Może w konfiguracji justice'a masz coś namieszane?
Autor:  pasztet [ środa, 5 listopada 2003, 19:06 ]
Tytuł: 
nie bo nawet na czystym freesco tak padal,wydaje mi sie ze to sieciowka,bo jak wpisuje ifconfig po zwisie to nie widzi eh1,choc ta sieciwka na windzie normalnie smigala
Autor:  pasztet [ sobota, 8 listopada 2003, 23:00 ]
Tytuł:  ??
teraz juz sie tak nie wiesz bo to byla wiansieciowki a raczej pci w ktorym ona byla,bo przelozylem do innego i jest ok,ale raz mi sie tak zwiesilo ze nic nie odowadalo ani telenet ani z klawiatury nie mona bylo nic wpisac,komus ie sie tak zdazylo co to moze byc??
Autor:  nufel [ niedziela, 9 listopada 2003, 23:10 ]
Tytuł: 
Człowieku, to ciężko przeczytać, a co dopiero zrozumieć :lol:
Strona 1 z 1 Strefa czasowa UTC+2godz.
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/