| Freesco, NND, CDN, EOS http://forum.freesco.pl/ |
|
| RESENT LOG >???? http://forum.freesco.pl/viewtopic.php?f=35&t=3537 |
Strona 1 z 1 |
| Autor: | Anonymous [ czwartek, 22 stycznia 2004, 15:07 ] |
| Tytuł: | RESENT LOG >???? |
co zonacza cos takiego w logach ????? Jan 22 12:14:59 - last message repeated 4 times Jan 22 12:16:00 - last message repeated 4 times Jan 22 12:16:12 - kernel: MASQ: failed TCP/UDP checksum from 217.17.33.102! Jan 22 12:16:16 - kernel: MASQ: failed TCP/UDP checksum from 217.17.33.102! Jan 22 12:16:16 - /bin/mgetty: Can't init modem /dev/cua0 with ATZ Jan 22 12:16:21 - kernel: MASQ: failed TCP/UDP checksum from 217.17.33.102! Jan 22 12:16:29 - kernel: MASQ: failed TCP/UDP checksum from 217.17.33.102! Jan 22 12:16:31 - /bin/mgetty: Can't init modem /dev/cua0 with ATZ Jan 22 12:17:02 - last message repeated 2 times Jan 22 12:18:03 - last message repeated 4 times Jan 22 12:19:05 - last message repeated 4 times Jan 22 12:20:06 - last message repeated 4 times Jan 22 12:21:07 - last message repeated 4 times Jan 22 12:22:09 - last message repeated 4 times zaznaczam ze mam DSLa 512 |
|
| Autor: | Anonymous [ czwartek, 22 stycznia 2004, 15:29 ] |
| Tytuł: | |
a poczatek RESENT LOGG wyglada w ten sposob ;-((((( Jan 22 12:41:26 - syslogd 1.3-3: restart (remote reception). Jan 22 12:41:27 - kernel: Kernel logging (proc) started. Jan 22 12:41:27 - kernel: Memory: sized by int13 088h Jan 22 12:41:27 - kernel: Console: 16 point font, 480 scans Jan 22 12:41:27 - kernel: Console: colour VGA+ 80x30, 1 virtual console (max 63) Jan 22 12:41:27 - kernel: pcibios_init : BIOS32 Service Directory structure at 0x000fadc0 Jan 22 12:41:27 - kernel: pcibios_init : BIOS32 Service Directory entry at 0xfb230 Jan 22 12:41:27 - kernel: pcibios_init : PCI BIOS revision 2.10 entry at 0xfb260 Jan 22 12:41:27 - kernel: Probing PCI hardware. Jan 22 12:41:27 - kernel: Calibrating delay loop.. ok - 199.88 BogoMIPS Jan 22 12:41:27 - kernel: Memory: 14116k/16384k available (696k kernel code, 384k reserved, 500k data) Jan 22 12:41:27 - kernel: Swansea University Computer Society NET3.035 for Linux 2.0 Jan 22 12:41:27 - kernel: NET3: Unix domain sockets 0.13 for Linux NET3.035. Jan 22 12:41:27 - kernel: Swansea University Computer Society TCP/IP for NET3.034 Jan 22 12:41:27 - kernel: IP Protocols: IGMP, ICMP, UDP, TCP Jan 22 12:41:27 - kernel: Linux IP multicast router 0.07. Jan 22 12:41:27 - kernel: Checking 'hlt' instruction... disabled Jan 22 12:41:27 - kernel: Linux version 2.0.38 (root@localhost.localdomain) (gcc version 2.7.2.3) #4 Wed May 17 22:55:01 EDT 2000 Jan 22 12:41:27 - kernel: Starting kswapd v 1.4.2.2 Jan 22 12:41:27 - kernel: Serial driver version 4.13p1 with no serial options enabled Jan 22 12:41:27 - kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Jan 22 12:41:27 - kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Jan 22 12:41:27 - kernel: lp1 at 0x0378, (polling) Jan 22 12:41:27 - kernel: Real Time Clock Driver v1.09 Jan 22 12:41:27 - kernel: Ramdisk driver initialized : 16 ramdisks of 4096K size Jan 22 12:41:27 - kernel: loop: registered device at major 7 Jan 22 12:41:27 - kernel: Floppy drive(s): fd0 is 1.44M Jan 22 12:41:27 - kernel: FDC 0 is an 8272A Jan 22 12:41:27 - kernel: Ethernet Bridge 002 for NET3.035 (Linux 2.0) Jan 22 12:41:27 - kernel: PPP: version 2.3.10 (demand dialling) Jan 22 12:41:27 - kernel: TCP compression code copyright 1989 Regents of the University of California Jan 22 12:41:27 - kernel: PPP line discipline registered. Jan 22 12:41:27 - kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). Jan 22 12:41:27 - kernel: CSLIP: code copyright 1989 Regents of the University of California. Jan 22 12:41:27 - kernel: RAMDISK: Compressed image found at block 0 Jan 22 12:41:27 - kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended Jan 22 12:41:27 - kernel: VFS: Mounted root (ext2 filesystem). Jan 22 12:41:27 - kernel: VFS: Disk change detected on device 02:00 Jan 22 12:41:28 - kernel: UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos) Jan 22 12:41:42 - syslogd 1.3-3: restart (remote reception). Jan 22 12:41:46 - kernel: ip_masq_icq: using TCP port range 60200-61000 Jan 22 12:41:46 - kernel: ip_masq_icq: loaded support on port 4000/UDP Jan 22 12:41:46 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:46 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:46 - insmod: Symbol 'io' not found Jan 22 12:41:46 - last message repeated 7 times Jan 22 12:41:46 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:46 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:46 - insmod: Initialization of /tmp/net/smc-ultra.o.A0 failed Jan 22 12:41:46 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:46 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:46 - insmod: Initialization of /tmp/net/smc-ultra.o.B0 failed Jan 22 12:41:46 - insmod: Symbol 'io' not found Jan 22 12:41:46 - insmod: Symbol 'io' not found Jan 22 12:41:46 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:46 - insmod: Initialization of /tmp/prm/ne.o.A0 failed Jan 22 12:41:46 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:46 - insmod: Initialization of /tmp/prm/ne.o.B0 failed Jan 22 12:41:46 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:46 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:46 - insmod: Symbol 'io' not found Jan 22 12:41:47 - last message repeated 7 times Jan 22 12:41:47 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:47 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:47 - insmod: Initialization of /tmp/net/smc-ultra.o.A1 failed Jan 22 12:41:47 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:47 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:47 - insmod: Initialization of /tmp/net/smc-ultra.o.B1 failed Jan 22 12:41:47 - insmod: Symbol 'io' not found Jan 22 12:41:47 - insmod: Symbol 'io' not found Jan 22 12:41:47 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:47 - insmod: Initialization of /tmp/prm/ne.o.A1 failed Jan 22 12:41:47 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:47 - insmod: Initialization of /tmp/prm/ne.o.B1 failed Jan 22 12:41:47 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:47 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:47 - insmod: Symbol 'io' not found Jan 22 12:41:47 - last message repeated 7 times Jan 22 12:41:47 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:47 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:47 - insmod: Initialization of /tmp/net/smc-ultra.o.A2 failed Jan 22 12:41:47 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:47 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:47 - insmod: Initialization of /tmp/net/smc-ultra.o.B2 failed Jan 22 12:41:47 - insmod: Symbol 'io' not found Jan 22 12:41:47 - insmod: Symbol 'io' not found Jan 22 12:41:47 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:47 - insmod: Initialization of /tmp/prm/ne.o.A2 failed Jan 22 12:41:47 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:47 - insmod: Initialization of /tmp/prm/ne.o.B2 failed Jan 22 12:41:47 - insmod: Cannot open /mnt/router/drv/*.o Jan 22 12:41:47 - insmod: Initialization of /tmp/net/3c509.o.C failed Jan 22 12:41:47 - kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html Jan 22 12:41:47 - insmod: Initialization of /tmp/net/3c59x.o.C failed Jan 22 12:41:47 - kernel: ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html Jan 22 12:41:47 - insmod: Initialization of /tmp/net/ne2k-pci.o.C failed Jan 22 12:41:47 - kernel: rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html Jan 22 12:41:47 - kernel: eth0: RealTek RTL8139 Fast Ethernet at 0x6100, IRQ 11, 00:30:4f:16:ee:cd. Jan 22 12:41:47 - kernel: eth1: RealTek RTL8139 Fast Ethernet at 0x6200, IRQ 10, 00:30:4f:16:fd:cd. Jan 22 12:41:47 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card. Jan 22 12:41:47 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0). Jan 22 12:41:47 - insmod: Initialization of /tmp/net/smc-ultra.o.C failed Jan 22 12:41:47 - insmod: Initialization of /tmp/net/tulip.o.C failed Jan 22 12:41:47 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards. Jan 22 12:41:47 - insmod: Initialization of /tmp/prm/ne.o.C failed Jan 22 12:41:49 - mode: User 'init' issued 'mode ethernet' Jan 22 12:41:51 - named[164]: starting. named 4.9.3-BETA26 Sun Nov 26 20:58:49 CST 1995 ^Iroot@fuzzy:/tmp/bind-4.9.3-BETA26/named Jan 22 12:41:51 - named[164]: cache zone "" loaded (serial 0) Jan 22 12:41:51 - named[164]: primary zone "Lubelska" loaded (serial 1999317) Jan 22 12:41:51 - named[164]: primary zone "10.in-addr.arpa" loaded (serial 1999317) Jan 22 12:41:51 - named[164]: primary zone "16.172.in-addr.arpa" loaded (serial 1999317) Jan 22 12:41:51 - named[164]: primary zone "168.192.in-addr.arpa" loaded (serial 1999317) Jan 22 12:41:51 - named[164]: primary zone "0.0.127.in-addr.arpa" loaded (serial 1999317) Jan 22 12:41:51 - named[165]: Ready to answer queries. Jan 22 12:41:54 localhost thttpd[313]: thttpd/2.05 09nov99 starting on port 82 Jan 22 12:41:54 localhost thttpd[313]: started as root without requesting chroot(), warning only Jan 22 12:41:55 localhost thttpd[317]: thttpd/2.05 09nov99 starting on port 80 Jan 22 12:41:55 localhost thttpd[317]: started as root without requesting chroot(), warning only Jan 22 12:41:59 - ntpdate[341]: no server suitable for synchronization found Jan 22 12:42:10 - /bin/mgetty: Can't init modem /dev/cua0 with ATZ Jan 22 12:42:41 - last message repeated 2 times stronki bardzo muli ;-((((( zmienilem w rc_masq tamte wpisy z masqa i w sumie nic nie dalo co zrobic zeby smigalo normalnie ???? |
|
| Strona 1 z 1 | Strefa czasowa UTC+2godz. |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|